|
| Bis(2-ethylhexyl) phthalate Basic information |
| Bis(2-ethylhexyl) phthalate Chemical Properties |
Melting point | -50 °C | Boiling point | 386 °C (lit.) | density | 0.985 g/mL at 20 °C (lit.) | vapor density | >16 (vs air) | vapor pressure | 1.2 mm Hg ( 93 °C) | refractive index | n20/D 1.488 | Fp | 405 °F | storage temp. | 2-8°C | solubility | Miscible with mineral oil and hexane (U.S. EPA, 1985) | form | Liquid | color | APHA: ≤10 | Odor | Very slight, characteristic. | Water Solubility | Negligible | FreezingPoint | <-60℃ | Merck | 14,2864 | BRN | 1890696 | Henry's Law Constant | (x 10-5 atm?m3/mol):
1.1 at 25 °C (calculated, Howard, 1989) | Exposure limits | Potential occupational carcinogen. NIOSH REL: TWA 5, STEL 10,
IDLH 5,000; OSHA PEL: TWA 5; ACGIH TLV: TWA 5 (adopted). | LogP | 7.5 at 20℃ | CAS DataBase Reference | 117-81-7(CAS DataBase Reference) | IARC | 2B (Vol. Sup 7, 77, 101) 2013 | NIST Chemistry Reference | Bis(2-ethylhexyl)phthalate(117-81-7) | EPA Substance Registry System | Di(2-ethylhexyl) phthalate (117-81-7) |
Hazard Codes | T,F | Risk Statements | 60-61-39/23/24/25-23/24/25-11 | Safety Statements | 53-45-36/37-16 | RIDADR | UN 1230 3/PG 2 | WGK Germany | 1 | RTECS | TI0350000 | Autoignition Temperature | 734 °F | TSCA | Yes | HazardClass | 9 | PackingGroup | III | HS Code | 29173400 | Hazardous Substances Data | 117-81-7(Hazardous Substances Data) | Toxicity | Acute oral LD50 for guinea pigs 26 gm/kg, mice 30 gm/kg, rats 30,600 mg/kg, rabbits 34 gm/kg
(quoted, RTECS, 1985). | IDLA | 5,000 mg/m3 |
| Bis(2-ethylhexyl) phthalate Usage And Synthesis |
Chemical Properties | Bis(2-ethylhexyl)phthalate is a colorless liquid with a slight odor. It is miscible with mineral oil and hexane, and soluble in most organic solvents. Bis(2-ethylhexyl)phthalate is insoluble in water (NTP, 1994a).
| Uses | Bis(2-ethylhexyl) phthalate is commonly used plasticizing agent for PVCs, which as such is a component of blood bank bags, surgical tubing, and other products including food wrappers and children’s toys.
| Uses | As plasticizer in PVC applications and flexible vinyls. | Uses | Dialkyl phthalate ester plasticizer used to import softness and flexibility to PVC products. | Uses | Bis(2-ethylhexyl) phthalate, known by a variety of other names and usually abbreviated DEHP, was patented in 1950 and first used as vacuum pump oil. But since then, it has become the most widely used plasticizer for poly(vinyl chloride) (PVC) and other plastics. Recently, relatively high levels of DEHP have been found in foods, especially foods high in oils and fats. The U.S. Food and Drug Administration now restricts its use in packaging materials to water-based foods. The European Commission has banned the use of DEHP and other phthalates in PVC toys.
Di(2-ethylhexyl)phthalate (DEHP) is a benzenedicarboxilate ester which is the most widely used plasticizer to soften resins. DEHP is hydrolyzed into what many believe to be its toxic metabolite, mono(2-ethylhexyl)phthalate (MEHP), by lipase enzymes in the gastrointestinal tract. | Production Methods | DEHP is commercially produced via esterification of phthalic
acid anhydride and 2-ethylhexanol. Esterification is completed
with an acid or metal catalyst or with no catalyst at
high temperature. | Definition | ChEBI: A phthalate ester that is the bis(2-ethylhexyl) ester of benzene-1,2-dicarboxylic acid. | General Description | Colorless to pale yellow oily liquid. Nearly odorless. | Air & Water Reactions | Insoluble in water. | Reactivity Profile | Bis(2-ethylhexyl) phthalate reacts with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing with alkali metals and hydrides. Incompatible with nitrates . | Health Hazard | Inhalation can cause nausea and irritation of nose and throat. Contact of liquid with eyes or skin causes irritation. Ingestion can cause abdominal cramps, nausea and diarrhea. | Health Hazard | The acute oral toxicity is of extremelylow order. The oral LD50 value in miceis in the range 30,000 mg/kg. Ingestion ofabout 10 mL of the liquid may produce gas trointestinal pain, hypermotility, and diar rhea in humans. Chronic administration byoral route did not produce any adverseeffect in animals. A dose of 100 mg/kg/dayproduced increased liver and kidney weight,as well as retardation of growth in dogs.Mice given diets containing 12,000 ppm ofdiethylhexyl phthalate for 40 weeks devel oped renal hyperplasia (Ward et al. 1988).There was no evidence of renal carcino genicity. Oral administration, however, pro duced tumors in livers in the laboratoryanimals. It is a suspected cancer-causingagent, and there is sufficient evidence of itscarcinogenicity in animals. Such evidence inhumans, however, is lacking Rock and co-workers (1988) reported theinteraction of diethylhexyl phthalate withblood during storage in PVC plastic containers. The plasticizer is leached into theplasma and converted to mono(2-ethylhexyl)phthalate by a plasma enzyme. At a levelof >125 mg/mL in the blood mono(2-ethyl hexyl) phthalate produced a 50% decrease inheart rate and blood pressure in rats. | Flammability and Explosibility | Notclassified | Chemical Reactivity | Reactivity with Water No reaction; Reactivity with Common Materials: No reaction; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent. | Safety Profile | Confirmed carcinogen
with experimental carcinogenic and
tumorigenic data. Experimental teratogenic
data. Other experimental reproductive
effects. Poison by intravenous route.
Human systemic effects by ingestion:
gastrointestinal tract effects. A mild skin
and eye irritant. When heated to
decomposition it emits acrid smoke. | Potential Exposure | Bis(2-ethylhexyl)phthalate is primarily used as one of several plasticizers in polyvinyl chloride resins used for fabricating flexible vinyl products. It has also been reported as being used as a replacement for polychlorinated biphenyls (PCBs) in dielectric fluids for electric capacitors and in vacuum pumps (NTP, 1994a; Merck, 1989). The primary stationary sources that have reported emissions of bis(2-ethylhexyl)phthalate in California are furniture and fixtures manufacturing, and lumber and wood products manufacturing (ARB, 1997b). | Carcinogenicity | Di(2-ethylhexyl) phthalate (DEHP) is reasonably anticipated to be
a human carcinogen based on sufficient evidence of carcinogenicity from studies in experimental animals. | Source | MCLG: zero; MCL: 6 μg/L. In addition, a DWEL of 700 μg/L
was recommended (U.S. EPA, 2000).
Detected in distilled water-soluble fractions of new and used motor oil at concentrations
of 17–21 and ND-1.2 μg/L, respectively (Chen et al., 1994). Also may leach from plastic products
used in analytical laboratories (e.g., tubing, containers).
| Environmental fate | Biological. Bis(2-ethylhexyl) phthalate degraded in both amended and unamended calcareous
soils from New Mexico. After 146 d, 76 to 93% degraded (mineralized) to carbon dioxide. No
other metabolites were detected (Fairbanks et al., 1985). In a 56-d experiment, [14C]bis(2-
ethylhexyl) phthalate applied to soil-water suspensions under aerobic and anaerobic conditions
gave 14CO2 yields of 11.6 and 8.1%, respectively (Scheunert et al., 1987).
When bis(2-ethylhexyl) phthalate was statically incubated in the dark at 25 °C with yeast extract
and settled domestic wastewater inoculum, no degradation was observed after 7 d. In a 21-d
period, however, gradual adaptation did occur resulting in 95 and 93% losses at concentrations of
5 and 10 mg/L, respectively (Tabak et al., 1981).
Half-lives of 19 h and 4–5 wk were reported for bis(2-ethylhexyl) phthalate in activated sludge
and river water, respectively (Saeger and Tucker, 1976). In sludge-amended agricultural soil,
bis(2-ethylhexyl) phthalate (initial concentration 4.1 nmol/g) degraded at a rate of 25.6 pmol/g·day
via the intermediate o-phthalic acid. Despite the presence of microorganisms capable of degrading
bis(2-ethylhexyl) phthalate, >40% of the bis(2-ethylhexyl) phthalate added was not mineralized
after 1 yr (Roslev et al., 1998). Aerobic degradation of bis(2-ethylhexyl) phthalate by acclimated
soil and activated sewage sludge microbes was studied using an acclimated shake flask CO2
evolution test. After 28 d, loss of bis(2-ethylhexyl) phthalate (primary degradation) was >99%,
with a lag phase of 2.7 d, and ultimate biodegradation (CO2 evolution) was 86%. The half-life
under these conditions was 4.55 d (Sugatt et al., 1984).
In the presence of suspended natural populations from unpolluted aquatic systems, the secondorder
microbial transformation rate constant determined in the laboratory was reported to be 4.2 ±
0.7 x 10-15 L/organism?h (Steen, 1991). Using the modified Sturm test, >80% of bis(2-ethylhexyl)
phthalate mineralized to carbon dioxide in 28 d (Scholz et al., 1997).
Surface Water. In laboratory experiments, the extrapolated volatilization half-life of bis(2-
ethylhexyl) phthalate in a stirred water vessel (outer dimensions 22 x 10 x 21 cm) conducted at 22
and 30 °C and an air flow rate of 0.20 m/sec is 3,500 h (Kl?pffer et al., 1982).
Photolytic. The estimated photolytic half-life of bis(2-ethylhexyl) phthalate in water is 143 d
(Wolfe et al., 1980).
Chemical/Physical. Hydrolyzes in water to o-phthalic acid (via the intermediate 2-ethyl-hexyl
hydrogen phthalate) and 2-ethylhexyl alcohol (Kollig, 1993; Wolfe et al., 1980). Although no pH
value was given, the reported hydrolysis rate constant under alkaline conditions is 1,400/M?yr
(Ellington et al., 1993; Kollig, 1993). A second-order rate constant of 1.1 x 10-4/M?sec was
reported for the hydrolysis bis(2-ethylhexyl) phthalate at 30 °C and pH 8 (Wolfe et al., 1980).
Kl?pffer et al. (1982) estimated an evaporation half-life of approximately 140 d from a 21-cm
deep vessel. | Metabolism | Bis(2-ethylhexyl) phthalate is metabolized in fish by enzymatic hydrolysis to mono-2-ethylhexyl phthalate, phthalic acid, and glucuronides of these compounds (Stalling et al., 1973). | Purification Methods | Wash the ester with Na2CO3 solution, then shake it with water. After the resulting emulsion has been broken by adding ether, the ethereal solution is washed twice with water, dried (CaCl2), and evaporated. The residual liquid is distilled several times under reduced pressure, then stored in a vacuum desiccator over P2O5 [French & Singer J Chem Soc 1424 1956]. [Beilstein 9 IV 3184.] |
| Bis(2-ethylhexyl) phthalate Preparation Products And Raw materials |
|