|
| | 3-(2-Aminoethylamino)propyl-dimethoxymethylsilane Basic information | | Introduction |
| | 3-(2-Aminoethylamino)propyl-dimethoxymethylsilane Chemical Properties |
| Melting point | 176-177 °C | | Boiling point | 146 °C15 mm Hg(lit.) | | density | 0.968 g/mL at 20 °C(lit.) | | vapor pressure | 0-12790Pa at 20-25℃ | | refractive index | n20/D 1.450 | | Fp | 220 °F | | storage temp. | Inert atmosphere,Room Temperature | | solubility | Soluble in water | | pka | 10.01±0.19(Predicted) | | form | Liquid | | Specific Gravity | 0.975 | | color | Colorless to Almost colorless | | Water Solubility | 860-1000g/L at 20℃ | | Sensitive | Air & Moisture Sensitive | | Hydrolytic Sensitivity | 7: reacts slowly with moisture/water | | BRN | 2074259 | | InChIKey | MQWFLKHKWJMCEN-UHFFFAOYSA-N | | LogP | -4--0.82 at 20℃ | | CAS DataBase Reference | 3069-29-2(CAS DataBase Reference) | | EPA Substance Registry System | 1,2-Ethanediamine, N-[3-(dimethoxymethylsilyl)propyl]- (3069-29-2) |
| | 3-(2-Aminoethylamino)propyl-dimethoxymethylsilane Usage And Synthesis |
| Introduction | 3-(2-Aminoethylamino)propyl-dimethoxymethylsilane is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis.
3-(2-Aminoethylamino)propyl-dimethoxymethylsilane is a diamino-functional silane capable of providing good adhesion and superior elougation and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass, mineral and metal surfaces - reinforcements, fillers and substrates - and resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. Its reduced alkoxy functionality might also be useful in waterborne systems such as latex coatings, adhesives and sealants, providing lower reactivity and therefore higher stability in the aqueous environment. Applications:
- 3-(2-Aminoethylamino)propyl-dimethoxymethylsilane can be used as adhesion promoters in polysulfide, polyvinyl chloride plastisol, silicone two-part urethanes and epoxy adhesives and sealants.
- Used as additives for cold-curing phenolic and furan foundry resins to improve the flexural strength of the sand-resin composites while;
- Used to maintain the shelf life of the resin over long periods;
- Used as starting material in the synthesis of amino-functional silicones;
- Used as additives to latex coatings, adhesives and sealants;
- Used as adhesion promoters in one-part silylated urethane adhesives and sealants.
| | Chemical Properties | Colorless transparent liquid | | Flammability and Explosibility | Notclassified |
| | 3-(2-Aminoethylamino)propyl-dimethoxymethylsilane Preparation Products And Raw materials |
|
