| | 1,3-Dimethylbutylamine Basic information |
| | 1,3-Dimethylbutylamine Chemical Properties |
| Melting point | -40.7°C (estimate) | | Boiling point | 108-110 °C(lit.) | | density | 0.717 g/mL at 25 °C(lit.) | | refractive index | n20/D 1.4085(lit.) | | Fp | 55 °F | | storage temp. | Flammables area | | solubility | Chloroform (Sparingly), Ethyl Acetate (Slightly) | | pka | 11.07±0.42(Predicted) | | form | Liquid | | color | Clear colorless | | Stability: | Volatile | | InChIKey | UNBMPKNTYKDYCG-UHFFFAOYSA-N | | CAS DataBase Reference | 108-09-8(CAS DataBase Reference) | | NIST Chemistry Reference | 2-Pentanamine, 4-methyl-(108-09-8) | | EPA Substance Registry System | 1,3-Dimethylbutylamine (108-09-8) |
| | 1,3-Dimethylbutylamine Usage And Synthesis |
| Chemical Properties | CLEAR COLOURLESS LIQUID | | Uses | 1,3-Dimethylbutylamine has been used to study the application of unfunctionized polymethacrylate resin (TSKgel G3000PWXL) as a stationary phase in liquid chromatography with UV detection. | | General Description | A liquid with a fishlike odor. Less dense than water. Flash point 39 - 55°F. Vapors heavier than air. May be toxic by ingestion, inhalation and skin absorption. | | Air & Water Reactions | Highly flammable. Slightly soluble in water. May be air sensitive. | | Reactivity Profile | 1,3-Dimethylbutylamine neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides. | | Health Hazard | May cause toxic effects if inhaled or ingested/swallowed. Contact with substance may cause severe burns to skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution. | | Fire Hazard | Flammable/combustible material. May be ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. | | Safety Profile | Poison by intravenous
route. Moderately toxic by ingestion and
skin contact. Mildly toxic by inhalation. A
dangerous fire and explosion hazard when
exposed to heat or flame; can react
vigorously with oxidizing materials. To fight
fire, use foam, CO2 dry chemical. When
heated to decomposition it emits toxic
fumes of NOx See also MINES. |
| | 1,3-Dimethylbutylamine Preparation Products And Raw materials |
|
