|
| | Allyl alcohol Basic information |
| | Allyl alcohol Chemical Properties |
| Melting point | -129 °C | | Boiling point | 96-98 °C(lit.) | | density | 0.854 g/mL at 25 °C(lit.) | | vapor density | 2 (vs air) | | vapor pressure | 23.8 mm Hg ( 25 °C) | | refractive index | n20/D 1.412(lit.) | | Fp | 21°C | | storage temp. | Flammables area | | solubility | Miscible with alcohol, chloroform, ether, and petroleum ether (Windholz et al., 1983) | | form | Liquid | | pka | 15.5(at 25℃) | | color | Clear | | Odor | Characteristic, pungent; sharp; causes tears. | | explosive limit | 18% | | Odor Type | alliaceous | | Water Solubility | MISCIBLE | | FreezingPoint | -129℃ | | Merck | 14,286 | | BRN | 605307 | | Henry's Law Constant | (x 10-6 atm?m3/mol):
5.00 at 25 °C (Hine and Mookerjee, 1975) | | Exposure limits | TLV-TWA 5 mg/m3 (2 ppm); STEL 10
mg/m3 (4 ppm) (ACGIH); IDLH 150 ppm. | | Stability: | Stability Flammable. Note low flash point and wide explosive limits. Forms explosive mixtures with air. Incompatible with strong oxidizing agents, strong acids, oleum, diallyl phosphite, metal halides, sodium hydroxide, tetrachloromethane, tri-N-bromoaniline, sodium, potassium, magnesium, aluminium. Polymerizes during prolonged storage. | | LogP | 0.17 at 25℃ | | CAS DataBase Reference | 107-18-6(CAS DataBase Reference) | | NIST Chemistry Reference | 2-Propen-1-ol(107-18-6) | | EPA Substance Registry System | Allyl Alcohol (107-18-6) |
| | Allyl alcohol Usage And Synthesis |
| Chemical Properties | Allyl alcohol is a flammable, colorless liquid. It has a pungent, mustard-like odor. It is used in making drugs, organic chemicals, pesticides, in the manufacture of allyl esters, and as monomers and prepolymers for the manufacture of resins and plastics. It has a large use in the preparation of pharmaceutical products, in organic synthesis, and as a fungicide and herbicide. Occupational workers engaged in industries such as the manufacture of drugs, pesticides, allyl esters, organic chemicals, resins, war gas, and plasticizers, are often exposed to this alcohol. | | Physical properties | Colorless, mobile liquid with a pungent, mustard-like odor at high concentrations. At low
concentrations, odor resembles that of ethyl alcohol. Katz and Talbert (1930) and Dravnieks
(1974) reported experimental detection odor threshold concentrations of 3.3 mg/m3 (1.4 ppmv) and
5 mg/m3 (2.1 ppmv), respectively. | | Uses | Allyl alcohol is used as an intermediate compound for synthesizing raw materials such as epichlorohydrin C3H5ClO and 1,4- butanediol C4H10O2, and this development is bringing about expansion of the range of uses of allyl alcohol. The term allyl of allyl compounds is derived from allium, the Latin word for garlic. It is also used to induce a mouse model of liver damage that has been used to study the mechanisms of hepatotoxicity and hepatic stem cell-mediated repair. | | Application | Allyl alcohol is used to produce glyceroland acrolein and other allylic compounds. It is also used in the manufacture of militarypoison gas. The ester derivatives are used inresins and plasticizers. | | Production Methods | Allyl alcohol is prepared by several different processes, the original is alkaline hydrolysis of allyl chloride
by steam injection at high temperatures. A more recent
commercial process used oxidation of propylene to acrolein,
which in turn reacts with a secondary alcohol to yield
allyl alcohol and a ketone. In this process, allyl alcohol is
not isolated, but its aqueous stream is converted directly to
glycerol. The most recent commercial process is isomerization
of propylene oxide over a lithium phosphate catalyst. | | Definition | ChEBI: Allyl alcohol is a propenol in which the C=C bond connects C-2 and C-3. It is has been found in garlic (Allium sativum). Formerly used as a herbicide for the control of various grass and weed seeds. It has a role as an insecticide, a herbicide, an antibacterial agent, a fungicide and a plant metabolite. It is a primary allylic alcohol and a propenol. | | General Description | Allyl alcohol appears as a clear colorless liquid with a mustard-like odor. Flash point 70°F. Very toxic by inhalation and ingestion. Less dense than water (7.1 lb / gal). Vapors are heavier than air. Prolonged exposure to low concentrations or short exposure to high concentrations may have adverse health effects from inhalation. | | Air & Water Reactions | Highly flammable. Water soluble. | | Reactivity Profile | Allyl alcohol presents a dangerous fire and explosion hazard when exposed to heat, flame, or oxidizing agents. Reacts violently or explosively with sulfuric acid, strong bases. Reacts violently with 2,4,6-trichloro-1,3,5-triazine and 2,4,6-tris(bromoamino)-1,3,5-triazine. Reacts with carbon tetrachloride to produce explosively unstable products [Lewis]. Mixing Allyl alcohol in equal molar portions with any of the following substances in a closed container caused the temperature and pressure to increase: chlorosulfonic acid, nitric acid, oleum, sulfuric acid [NFPA 491M. 1991]. | | Hazard | Toxic by skin absorption. Eye and upper
respiratory tract irritant. Questionable carcinogen.
| | Health Hazard | The toxicity of allyl alcohol is moderately high, affecting primarily the eyes. The other target organs are the skin and respiratory system. Inhalation causes eyeirritation and tissue damage. A 25-ppmexposure level is reported to produce asevere eye irritation. It may cause atemporary lacrimatory effect, manifested by photophobia and blurred vision, for some hours after exposure. Occasional exposure of a person to allyl alcohol does not indicate chronic or cumulative toxicity. Dogterom and associates (1988) investigated the toxicity of allyl alcohol in isolated rathepatocytes. The toxicity was independent of lipid peroxidation, and acrylate was found to be the toxic metabolite Ingestion of this compound may cause irritation of the intestinal tract. The oral LD50 value in rats is 64 mg/kg (NIOSH 1986). | | Fire Hazard | Allyl alcohol vapor may explode if ignited in confined areas. Combustion products may be poisonous. The vapor is heavier than air and flashback along vapor trail may occur. Gives off toxic fumes when heated. May react vigorously with oxidizing materials, carbon tetrachloride, acids, oleum, sodium hydroxide, diallyl phosphite, potassium chloride, or tri-n-bromomelamine. | | Flammability and Explosibility | Flammable | | Safety Profile | Suspected carcinogen. Poison by inhalation, ingestion, skin contact, subcutaneous, intraperitoneal, and possibly other routes. A slim, severe eye (human), and systemic irritant. Mutation data reported. Dangerous fire and explosion hazard when exposed to heat, flame, or oxidizers. | | Potential Exposure | Allyl alcohol is a colorless water soluble liquid. The melting point, boiling point, vapor pressure, and the octanol–water partition coefficient (log Kow) are 129°C, 97°°C, 26.1mmHg at 25°C, and 0.17, respectively. The Henry’s law constant is 4.99×10-6 atm-m3 mol-1. Allyl alcohol’s production, its use as an industrial solvent and as a raw material/intermediate in the preparation of pharmaceuticals, polymers, organic chemicals, in the manufacture of glycerol and acrolein, and in the production of insecticides and herbicides, may result in its release to the environment. | | Carcinogenicity | Male and female F344 rats were
given allyl alcohol in the drinking water at a concentration of
0 or 300 mg/L for 106 weeks. The incidence of tumors was
similar to that in controls . Male and female hamsters
were administered 2 mg allyl alcohol by oral gavage once a
week for 60 weeks. The incidence of tumors did not increase
significantly compared to controls. | | Shipping | UN1098 Allyl alcohol Hazard class: 6.1; Labels: 6.1-Poison Inhalation Hazard, 3-Flammable liquids, Inhalation Hazard Zone B. | | Purification Methods | It can be dried with K2CO3 or CaSO4, or by azeotropic distillation with *benzene followed by distillation under nitrogen. It is difficult to obtain it free of peroxide. It has also been refluxed with magnesium and fractionally distilled [Hands & Norman Ind Chem 21 307 1945]. [Beilstein 1 IV 2079.] | | Environmental Fate | The vapor pressure of allyl alcohol, 26.1mmHg at 25°C, indicates that if released in the air, it will exist mainly as a vapor in the ambient atmosphere. If released to soil, allyl alcohol is expected to have very high mobility based upon an estimated Koc of 1.3 and will be distributed mainly in the water and soil. If released into water, allyl alcohol will stay in the water and is not expected to adsorb to suspended solids and sediments. Allyl alcohol is stable in water since it lacks functional groups that hydrolyze under environmental conditions and hence hydrolysis is not expected to be an important environmental fate process. In an aerobic biodegradation study, allyl alcohol was found to readily degradable (82–86%) in 14 days. The estimated bioconcentration factor of 3.2 based on the low log Kow indicates that the potential to bioaccumulate in aquatic organisms is expected to be low. | | Incompatibilities | May form explosive mixture with air. Reacts explosively with carbon tetrachloride, strong bases. Also incompatible with strong acids. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Polymerization may be caused by heat above 99 C, peroxides, or oxidizers. | | Waste Disposal | Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal. Incineration after dilution with a flammable solvent. | | Precautions | Occupational workers should be careful during handling and use of allyl alcohol and wear |
| | Allyl alcohol Preparation Products And Raw materials |
|
