|
| | 1,2-Dibromoethane Basic information |
| | 1,2-Dibromoethane Chemical Properties |
| Melting point | 9 °C | | Boiling point | 131-132 °C(lit.) | | density | 2.18 g/mL at 25 °C(lit.) | | vapor density | ~6.5 (vs air) | | vapor pressure | 11.7 mm Hg ( 25 °C) | | refractive index | n20/D 1.539(lit.) | | Fp | 132°C | | storage temp. | 0-6°C | | solubility | water: soluble250 part | | form | Liquid | | color | Clear colorless to pale yellow | | Odor | Mild, sweet odor detectable at 10 ppm | | Odor Threshold | 10 ppm | | Water Solubility | 4 g/L (20 ºC) | | Sensitive | Light Sensitive | | Merck | 14,3796 | | BRN | 605266 | | Henry's Law Constant | 7.58(x 10-4 atm?m3/mol) at 25 °C (static headspace-GC, Welke et al., 1998) | | Exposure limits | NIOSH REL: TWA 0.045 ppm, 15-min C 0.13 ppm, IDLH 100 ppm;
OSHA PEL: TWA 20 ppm, C 30 ppm, 5-min peak 50 ppm;ACGIH TLV: suspected human
carcinogen. | | Stability: | Stable, but may be light sensitive. Incompatible with strong oxidizing agents, magnesium, alkali metals. | | CAS DataBase Reference | 106-93-4(CAS DataBase Reference) | | NIST Chemistry Reference | Ethane, 1,2-dibromo-(106-93-4) | | IARC | 2A (Vol. 15, Sup 7, 71) 1999 | | EPA Substance Registry System | Ethylene dibromide (106-93-4) |
| | 1,2-Dibromoethane Usage And Synthesis |
| Chemical Properties | 1,2-Dibromoethane is a colorless nonflammable liquid with a mild sweet odor, like chloroform. The minimum concentration detectable by odor is 10 ppm.It is stable at room temperature, but can be slowly decomposed into toxic substances under light. It is miscible with ethanol, ether, carbon tetrachloride, benzene, gasoline and other organic solvents, and forms azeotropes, and dissolves in about 250 times of water. Noncombustible. Very toxic by inhalation, skin absorption or ingestion. used as a solvent, scavenger for lead in gasoline, grain fumigant and in the manufacture of other chemicals. | | Physical properties | Colorless liquid with a sweet, chloroform-like odor. Odor threshold concentration is 25 ppb
(quoted, Keith and Walters, 1992). | | Uses | Historically, the primary use of 1,2-dibromoethane has been as a lead scavenger in antiknock mixtures added to gasolines (IPCS 1996). Lead scavenging agents transform the combustion products of tetraalkyl lead additives to forms that are more likely to be vaporized from engine surfaces. In 1978, 90% of the 1,2-dibromoethane produced was used for this purpose (ATSDR 1992). Annual consumption of 1,2-dibromoethane in the United States has decreased since the U.S. Environmental Protection Agency banned the use of lead in gasoline. | | Uses | 1,2-Dibromoethane (EDB) is used as a fumigant for grains, in antiknock gasolines, as asolvent, and in organic synthesis. Most of the uses of 1,2-dibromoethane have been stopped in the United States; however, it is still used as a fumigant for treatment of logs for termites and beetles, for the control of moths and beehives, and as a preparation for dyes and waxes. | | Preparation | 1,2-Dibromoethane is manufactured via uncatalyzed, liquid-phase bromination of ethylene. Gaseous ethylene is brought into contact with bromine by various methods, allowing for dissipation of the heat of the reaction. | | Definition | ChEBI: 1,2-dibromoethane is a bromoalkane that is ethane carrying bromo substituents at positions 1 and 2. It is produced by marine algae. It has a role as a fumigant, a carcinogenic agent, a marine metabolite, an algal metabolite, a mouse metabolite and a mutagen. It is a bromohydrocarbon and a bromoalkane. | | General Description | 1,2-dibromomethane is a heavy, colourless liquid with a mild sweet odour, like chloroform. Ethylene dibromide is incompatible with strong oxidisers, magnesium, alkali metals, and liquid ammonia. Ethylene dibromide is soluble in alcohols, ethers, acetone, benzene, and most organic solvents and slightly soluble in water. It reacts with lead residues to generate volatile lead bromides. Because of limitations in epidemiological study evidences for ethylene dibromide as a human carcinogen is inconclusive. In 1984, the U.S. EPA imposed a ban on its use as a soil and grain fumigant. | | Air & Water Reactions | Slightly soluble in water. May react slowly with moisture. | | Reactivity Profile | 1,2-Dibromoethane slowly decomposes in the presence of light and heat. Turns brown upon exposure to light. Corrosive to iron and other metals. May decompose upon contact with alkalis. Incompatible with oxidizing agents. Reacts with sodium, potassium, calcium, powdered aluminum, zinc, magnesium and liquid ammonia. May attack some plastics, rubber and coatings. May poison platinum catalysts [Hawley]. Reacts as an alkylating agent . | | Hazard | Probable carcinogen. Toxic by inhalation,
ingestion, and skin absorption; strong irritant to
eyes and skin. | | Health Hazard | Local inflammation, blisters and ulcers on skin; irritation in lungs and organic injury to liver and kidneys; may be absorbed through skin. | | Health Hazard | 1,2-Dibromoethane is toxic by inhalation,ingestion, or skin contact. The acute toxicsymptoms are depression of the central ner vous system, irritation and congestion oflungs, hepatitis, and renal damage. Chronicexposure can produce conjunctivitis, bron chial irritation, headache, depression, lossof appetite, and loss of weight. Recoveryoccurs after cessation of exposure. Prolongedor repeated exposures to high concentrationscan be fatal to animals and humans. Lethalconcentration for a 2-hour exposure period is400 ppm in rats.
1,2-Dibromoethane is moderate to highlytoxic by ingestion. Its toxicity is far greaterthan that of 1,2-dichloroethane. An oralintake of 5 to 10 mL of the liquid can be fatalto humans. Death occurs from necrosis of theliver and kidney damage. The oral LD50 val ues varied between 50 and 125 mg/kg fordifferent species of laboratory animals.
Vapors are irritant to the eyes. Contactwith the liquid can damage vision. Skincontact may produce severe irritation andblistering.
Mutagenic tests were positive, while thehistidine reversion–Ames test gave incon clusive results (NIOSH 1986). 1,2-Dibromo ethane is carcinogenic to animals and issuspected to cause cancer in humans. Inhala tion of this compound produced tumors inthe lungs and nose in mice and rats. Oraladministration caused cancers in the liver andgastrointestinal tract. | | Flammability and Explosibility | Ethylene dibromide is a noncombustible substance (NFPA rating = 0). | | Agricultural Uses | Fumigant, Nematicide: Not approved for use in EU countries. Not registered
for use in the U.S. Persons whose clothing or skin is contaminated
with liquid ethylene dibromide (above 10°C) can
secondarily contaminate others by direct contact or through
off-gassing vapor. Ethylene dibromide was used extensively
as a pesticide and an ingredient of soil, vegetable, fruit, and
grain fumigant formulations. Still used in India, South Africa
and other countries. There are 15 global suppliers. | | Trade name | AADIBROOM®; EDB-85; FUMO-GAS®;
ISCOBROME D®; KOPFUME®; NEFIS®; NEPHIS®;
SOILFUME®; UNIFUME® | | Safety Profile | Confirmed carcinogen
with experimental carcinogenic,
neoplastigenic, and teratogenic data. Human
poison by ingestion. Experimental poison by
ingestion, sktn contact, intraperitoneal, and
possibly other routes. Moderately toxic by
inhalation and rectal routes. Human
systemic effects by ingestion: hypermothty,
barrhea, nausea or vomiting, decreased
urine volume or anuria. Experimental
reproductive effects. Human mutation data
reported. A severe skin and eye irritant.
Implicated in worker sterdity. When heated
to decomposition it emits toxic fumes of Br-. See also ETHYLENE DICHLORIDE
and BROMIDES. | | Potential Exposure | Ethylene dibromide is used as a chemical intermediate; as a fumigant for ground pest control; as
a constituent of ethyl gasoline (anti-knock agent). It is also
used in fire extinguishers, gauge fluids, and waterproofing
preparations; and it is used as a solvent for celluloid, fats,
oils, and waxes. Pesticide not in use; TRI and/or IUR indicates importers or manufacturers are unlikely | | Carcinogenicity | 1,2-Dibromoethane is reasonably anticipated to be a human carcinogen based on sufficient evidence of carcinogenicity from studies in experimental animals.
Cancer Studies in Experimental Animals | | Metabolic pathway | The bacterial strain GP1 can utilize 1,2-dibromoethane
as a sole carbon and energy source. The first step in
1,2-dibromoethane is catalyzed by a hydrolytic
haloalkane dehalogenase and the resulting 2-
bromoethanol is rapidly converted to ethylene oxide,
preventing the accumulation of 2-bromoethanol and 2-
bromoacetaldehyde. However, the further metabolic
pathway(s) is unclear. | | storage | work with EDB should be conducted in a fume hood to prevent exposure by inhalation, and appropriate impermeable gloves and safety goggles should be worn to prevent skin contact. Gloves and protective clothing should be changed immediately if EDB contamination occurs. Since EDB can penetrate neoprene and other plastics, protective apparel made of these materials does not provide adequate protection from contact with EDB. | | Shipping | UN1605/154 Ethylene dibromide, Hazard Class:
6.1; Labels: 6.1-Poison Inhalation Hazard, Inhalation
Hazard Zone B | | Purification Methods | Wash the dibromide with conc HCl or H2SO4, then water, aqueous NaHCO3 or Na2CO3, more water, and dry it with CaCl2. Fractionally distil it. Alternatively, keep in daylight with excess bromine for 2hours, then extract with aqueous Na2SO3, wash with water, dry with CaCl2, filter and distil. It can also be purified by fractional crystallisation by partial freezing. Store it in the dark. [Beilstein 1 H 90, 1 I 28, 1 II 61, 1 III 182, 1 IV 158.] | | Incompatibilities | Reacts vigorously with chemically
active metals; liquid ammonia, strong bases; strong
oxidizers; causing fire and explosion hazard. Light, heat,
and moisture can cause slow decomposition, forming
hydrogen bromide. Attacks fats, rubber, some plastics and
coatings. | | Waste Disposal | Controlled incineration with
adequate scrubbing and ash disposal facilities |
| | 1,2-Dibromoethane Preparation Products And Raw materials |
| Raw materials | Government regulation-->Hydrogen bromide-->Ethylene glycol | | Preparation Products | 1-AMINO-CYCLOPROPANEMETHANOL-->N-(2-[4-(4-CHLOROPHENYL)PIPERAZIN-1-YL]ETHYL)-3-METHOXYBENZAMIDE-->1-(Boc-amino)cyclopropanecarboxylic acid-->2-Dicyclohexylphosphino-2'-(N,N-dimethylamino)biphenyl-->1,2-Bis(diphenylphosphino)ethane-->Tri(o-tolyl)phosphine-->BAPTA-->BAPTA, TETRASODIUM SALT-->1-Aminocyclopropanecarboxylic acid-->1-AMINOCYCLOPROPANECARBONITRILE-->2-DI-TERT-BUTYLPHOSPHINO-2',4',6'-TRIISOPROPYLBIPHENYL-->(2-Aminoethyl)phosphonic acid-->(TRIMETHYLSILYL)DIAZOMETHANE-->1,2-BIS(4-PYRIDYL)ETHANE-->1,2-Bis(diphenylphosphino)ethane nickel(II) chloride-->2,3-Dihydrobenzo[b]furan-5-carbaldehyde-->4-(2-(PIPERIDIN-1-YL)ETHOXY)-3,5-DICHLOROBENZENAMINE-->(3-BROMO-PYRIDIN-4-YL)-CARBAMIC ACID TERT-BUTYL ESTER-->1-Phenyl-1-cyclopropanecarboxylic acid-->3-(1，2，2，2-tetrabromoethyl)-2，2-dimethyl cyclo-propane carboxylic acid-->1,1-Cyclopropanedicarboxylic acid dimethyl ester-->ETHYLENE TRITHIOCARBONATE-->Succinonitrile-->(1-phenylcyclopropyl)methanamine-->sulfo-imidazoline betaine-->Sodium 2-bromoethanesulphonate-->Prochloraz-->ETHYLENESULFATE-->Ethylene glycol diacetate-->Diquat dibromide monohydrate |
|
