| | 2-Chloroethanol Basic information |
| | 2-Chloroethanol Chemical Properties |
| Melting point | -63 °C | | Boiling point | 129 °C(lit.) | | density | 1.201 g/mL at 25 °C(lit.) | | vapor density | 2.78 (vs air) | | vapor pressure | 5 mm Hg ( 20 °C) | | refractive index | n20/D 1.441(lit.) | | Fp | 140 °F | | storage temp. | 2-8°C | | solubility | Soluble in alcohol (Weast, 1986) | | form | Liquid | | pka | 14.02±0.10(Predicted) | | color | Yellow | | Odor | Faint, ethereal. | | Water Solubility | MISCIBLE | | Sensitive | Moisture Sensitive | | Merck | 14,3793 | | BRN | 878139 | | Exposure limits | Ceiling limit 3 mg/m3 (1 ppm) skin
(ACGIH); TLV-TWA air 16 mg/m3 (5 ppm)
skin (OSHA); IDLH 10 ppm (NIOSH). | | Stability: | Stable. Incompatible with oxidizing agents. | | LogP | -0.06-1.06 at 20℃ | | CAS DataBase Reference | 107-07-3(CAS DataBase Reference) | | NIST Chemistry Reference | Ethanol, 2-chloro-(107-07-3) | | EPA Substance Registry System | 2-Chloroethanol (107-07-3) |
| | 2-Chloroethanol Usage And Synthesis |
| Description | Ethylene chlorohydrine is a clear, colourless liquid with mild, ethereal odour. It reacts with
alkali metals. Ethylene chlorohydrine has applications as a laboratory reagent and as a
pharmaceutical intermediate. Ethylene chlorohydrine is a building block in the production
of pharmaceuticals, biocides, and plasticisers, used for manufacture of thiodiglycol, an
important solvent for cellulose acetate and ethyl cellulose, textile-printing dyes, extraction
of pine lignin, in dewaxing, refining of rosin, and the cleaning of machines. Several dyes
are prepared by the alkylation of aniline derivatives with chloroethanol. | | Chemical Properties | 2-Chloroethanol is a colorless liquid with a faint, ethereal odor and is miscible with water. Among the halogenated alcohols, ethylene chlorohydrin is the most prominent, along with the chloropropanols. | | Physical properties | Colorless liquid with a faint, ether-like odor. Odor threshold concentration is 400 ppb (quoted,
Keith and Walters, 1992). | | Uses | Ethylene chlorohydrin is used in the manufacture of insecticides, as a solvent for cellu lose esters, in treating sweet potatoes beforeplanting (Merck 1989), and in making ethylene glycol and ethylene oxide. Exposurerisks to this compound may arise when itis formed from ethylene oxide during thesterilization of grain and spices, drugs, andsurgical supplies. The compound was used inthe past in hastening grape vine sprouting. | | Uses | 2-Chloroethanol, is used in the preparation of TTFTT (tetrathiafulvalene-2,3,6,7-tetrathiolate) and important building block in TTF syntheis. In addition, it is used in the synthesis of vinyltriazoles. This is the labeled analog. | | Uses | Ethylene chlorohydrin (CH2Cl-CH2-OH; 2-Chloroethanol) is used for its special solvent properties. It is a chemical intermediate in the production of ethylene glycol and, in the past, ethylene oxide. This alcohol is used in the manufacturing of insecticides and as a cleaning agent for machines. Indirect exposure can result from release as a by-product in applications involving ethylene oxide and its accumulation in some foodstuffs as a result of sterilization or packaging. | | Definition | ChEBI: 2-chloroethanol is a chloroethanol carrying a chloro substituent at position 2. It has a role as a xenobiotic metabolite. | | Production Methods | 2-Chloroethanol is manufactured by the reaction of ethylene
gas with dilute hydrochlorous acid. The principal use of
2-chloroethanol was formerly in producing ethylene oxide,
in which ethylene was reacted with hypochlorous acid.
However, the current production of ethylene oxide does
not use this procedure. Facilities for ethylene chlorohydrin
have, in many cases, been converted to the production of
propylene chlorohydrin, the dehydrochlorination of which
yields propylene oxide. | | General Description | 2-Chloroethanol is a colorless liquid with an ether-like odor. 2-Chloroethanol is soluble in water and is also a combustible liquid. It reacts with alkali metals.Ethylene chlorohydrine has applications as a laboratory reagent and as a pharmaceutical intermediate. Ethylene chlorohydrine is a building block in the production of pharmaceuticals, biocides, and plasticisers, used for manufacture of thiodiglycol, an important solvent for cellulose acetate and ethyl cellulose, textile-printing dyes, extraction of pine lignin, in dewaxing, refining of rosin, and the cleaning of machines. Several dyes are prepared by the alkylation of aniline derivatives with chloroethanol.
| | Air & Water Reactions | Highly flammable. 2-Chloroethanol is soluble in water. | | Reactivity Profile | Mixing 2-Chloroethanol in equal molar portions with any of the following substances in a closed container caused the temperature and pressure to increase: chlorosulfonic acid, ethylene diamine, and sodium hydroxide, [NFPA 1991]. Ethylenediamine reacts violently with 2-Chloroethanol. (Lewis, R.J., Sr. 1992. Sax's Dangerous Properties of Industrial Materials, 8th Edition. New York: Van Nostrand Reinhold. pp. 1554.). | | Hazard | Deadly via ingestion, inhalation, and skin
absorption; strong irritant, penetrates ordinary rubber gloves and protective clothing. Moderate fire
hazard. Questionable carcinogen. | | Health Hazard | Ethylene chlorohydrin is a severe acute poi son. The target organs are CNS, cardiovascu lar system, kidney, liver, and gastrointestinalsystem. The symptoms of acute toxicity arerespiratory distress, paralysis, brain damage,nausea, and vomiting. In addition, ethylenechlorohydrin can cause glutathione depletionin liver and formation of polyuria in kidney.
Ingestion of 20–25 mL can be fatal tohumans. Death may occur in 48 hours dueto metabolic acidosis and respiratory failure.Ethanol therapy apparently produced no ben efit in treatment (Deng et al. 2001). It maybe more toxic by skin contact than by oralintake. Inhalation of its vapors can producenausea, vomiting, headache, chest pain, andstupor (ACGIH 1986). At high concentra tions, death may occur. Exposure to 300 ppmfor 2 hours can be fatal to humans.
LD50 value, oral (mice): 81 mg/kgLD50 value, intraperitoneal (mice): 97 mg/kg
Ethylene chlorohydrin is an irritant to theskin, eyes, nose, and mucous membranes.It is a confirmed mutagen by the Ames testin Salmonella typhimurium. It inhibits thegrowth of DNA-deficient bacteria. Exposureto this compound increased the chromosomeaberration in the bone marrow of rats. Theodor threshold is 0.4 ppm.
A 2-year dermal study showed no evidenceof carcinogenicity of ethylene chlorohydrin onrodents (NTP 2004). The compound, however,caused malformed fetus and maternal mortality in experimental animals. | | Fire Hazard | 2-Chloroethanol decomposition products will react with water or steam to produce toxic and corrosive fumes of phosgene and hydrogen chloride. Vapors are heavier than air and may flash back to a source of ignition. | | Flammability and Explosibility | Flammable | | Chemical Reactivity | Reactivity with Water: No reaction; Reactivity with Common Materials: No reaction; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent. | | Safety Profile | A poison by ingestion, inhalation, skin contact, intraperitoneal, intravenous, and subcutaneous routes. Moderately toxic to humans by inhalation. It can affect the nervous system, liver, spleen, and lungs. An experimental teratogen. Mutation data reported. A severe eye and mild skin irritant. Flammable liquid when exposed to heat, flame, or oxidizers. To fight fire, use alcohol foam, CO2, dry chemical. Violent reaction with chlorosulfonic acid, ethylene hamine, sodmm hydroxide. Reacts with water or steam to produce toxic and corrosive fumes. Potentially violent reaction with oxidizing materials. When heated to decomposition it emits highly toxic fumes of Cland phosgene. See also CHLORINATED HYDROCARBONS, ALIPHATIC.
| | Potential Exposure | Ethylene chlorohydrin is used as a solvent and emulsifier; in the synthesis of ethylene glycol, ethylene oxide, amines, carbitols, indigo, malonic acid,
novocaine, and in other reactions where the hydroxyethyl
group is introduced into organic compounds; for the separation of butadiene from hydrocarbon mixtures; in dewaxing
and removing cycloalkanes from mineral oil; in the refining
of rosin; in the manufacture of certain pesticides and in the
extraction of pine lignin. In the lacquer industry, it is used
as a solvent for cellulose acetate, cellulose esters, resins and
waxes; and in the dyeing and cleaning industry, it is used to
remove tar spots; as a cleaning agent for machines; and as a
solvent in fabric dyeing. It has also found use in agriculture
in speeding up sprouting of potatoes and in treating seeds to
inhibit biological activity. Making chemical warfare agents | | Carcinogenicity | No evidence of carcinogenicity was observed in rats that ingested doses of 4, 8, or 16 mg/kg
2-chloroethanol in drinking water for up to 2 years. The study
was not reported in detail, and small numbers of animals were
used. F344 rats were given subcutaneous injections
twice weekly at doses of 0.3, 1, 3, or 10 mg/kg for 1 year,
followed by a 6-month observation period. An increased
incidence of pituitary gland adenomas was observed in
female rats; the incidence in the dosed female rats (all
doses combined) was 7/100 and the control incidence
was 1/50. 2-Chloroethanol was not carcinogenic in
NMRI mice given subcutaneous injections once weekly for
70 weeks at doses of 0.3, 1.0, or 3mg . In an NTP study,
2-chloroethanol was applied dermally to F344 rats and CD-1mice for 2 years, at doses of 50 and 100 mg/kg for rats and 7.5
and 15 mg per animal for mice. There was no evidence of
carcinogenicity. | | Environmental fate | Biological. Heukelekian and Rand (1955) reported a 10-d BOD value of 0.50 g/g which is
50.0% of the ThOD value of 1.00 g/g.
Chemical/Physical. Reacts with aqueous sodium bicarbonate solutions at 105 °C producing
ethylene glycol (Patnaik, 1992). | | Shipping | UN1135 Ethylene chlorohydrin, Hazard class:
6.1; Labels: 6.1-Poison Inhalation Hazard, 3-Flammable
liquid, Inhalation Hazard Zone B | | Purification Methods | Dry it with, then distil it from, CaSO4 in the presence of a little Na2CO3 to remove traces of acid. [Beilstein 1 IV 1372.] | | Incompatibilities | May form explosive mixture with air.
Strong oxidizers may cause fire and explosions.
Incompatible with strong caustics (formation of ethylene
gas), strong acids; alkaline metals; aliphatic amines; isocyanates. Violent reaction with ethylene diamine, chlorosulfonic acid. Attacks some plastics, rubber and coatings. Reacts
with water or steam producing toxic and corrosive fumes | | Waste Disposal | Incineration, preferably after
mixing with another combustible fuel. Care must be exercised to assure complete combustion to prevent the formation of phosgene. An acid scrubber is necessary to remove
the halo acids produced. |
| | 2-Chloroethanol Preparation Products And Raw materials |
|
