LICHROSORB(R) RP8

LICHROSORB(R) RP8 Basic information
Product Name:LICHROSORB(R) RP8
Synonyms:SILICA GEL S 0.2-0.5 MM FOR COLUMN &;SUPELCLEAN ENVI-18, 100 GRAMS;HPLC SORBENTS SILICA GELS 80 ANGSTROMS, 60 MICRO SI;SILICA GEL S 0,063-0,2 MMFOR COLUMN CHROMATOGRAPHY;SILICA GEL D FOR THIN LAYER-CHROMATOGRAP HY;SilicaGel10-18;SilicaGel32-63;SilicaGel50-100Mesh
CAS:63231-67-4
MF:H2O3Si
MW:78.09958
EINECS:613-187-4
Product Categories:metal oxide;Silica Gels;UVCBs-inorganic
Mol File:63231-67-4.mol
LICHROSORB(R) RP8 Structure
LICHROSORB(R) RP8 Chemical Properties
Boiling point approximate 3,000℃
storage temp. Store at RT.
form Solid
color White
Water Solubility Soluble in hydrofluoric acid. Insoluble in water.
Sensitive Hygroscopic
Merck 14,8493
Exposure limitsNIOSH: IDLH 3000 mg/m3; TWA 6 mg/m3
InChIKeyIJKVHSBPTUYDLN-UHFFFAOYSA-N
EPA Substance Registry SystemSilica gel (63231-67-4)
Safety Information
WGK Germany 3
RTECS VV7340000
3
TSCA Yes
MSDS Information
LICHROSORB(R) RP8 Usage And Synthesis
Chemical PropertiesWhite powder
UsesExcipient.
UsesSilica gel, wide pore is mainly used for the dehydrated purification of the industrial gases, the clearance of the organic acids and high polymers in the insulative oil, the purification and separation of the medicines. It is also used in column chromatography without applied pressure (gravity pulled).
DefinitionLICHROSORB(R) RP8 is an adsorbent consisting of amorphous silica produced by the reaction of sodium silicate with mineral acid.
Purification MethodsBefore use as a drying agent, silica gel is heated in an oven, then cooled in a desiccator. Conditions in the literature range from heating at 110o for 15hours to 250o for 2-3hours. Silica gel has been purified by washing with hot acid (in one case successively with aqua regia, conc HNO3, then conc HCl; in another case it was digested overnight with hot conc H2SO4), followed by exhaustive washing with distilled water (one week in a Soxhlet apparatus has also been used), and prolonged oven drying. Alternatively, silica gel has been extracted with acetone until all soluble material was removed, then dried in a current of air, washed with distilled water and oven dried. Silica gel has also been washed successively with water, M HCl, water, and acetone, then activated at 110o for 15hours. Silicon monoxide [10097 -28 -6] M 44.1, m > 1700o, d 4 2.18. Purify the monoxide by sublimation in a porcelain tube in a furnace at 1250o (4hours) in a high vacuum (10-4mm) in a stream of N2. It is obtained as brownish black scales. [Schenk in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol I p 696 1963.]
LICHROSORB(R) RP8 Preparation Products And Raw materials
METHYL ISOCYANOACETATE N-BUTYLISOCYANIDE PHENYLSELENOL DICHLORO(ETHYLENEDIAMINE)PLATINUM(II) SPIN COATING AND DIP COATING SOLUTION BS-05S SALCOMINE 2,4-PENTANEDIONE, SILVER DERIVATIVE 1,1,3,3-TETRAMETHYLBUTYL ISOCYANIDE LICHROSORB(R) RP8 Mica COBALT(II) ACETYLACETONATE TALC Cupric acetylacetonate POTASSIUM IODIDE WITH TIXOSIL TERT-BUTYL ISOCYANIDE COBALT ETHYLENE DIAMINE CHLORIDE Benzyl isocyanide TRIS(2,2,6,6-TETRAMETHYL-3,5-HEPTANEDIONATO)DYSPROSIUM(III)

Email:[email protected] [email protected]
Copyright © 2024 Mywellwork.com All rights reserved.