| | Arsenic Basic information |
| Product Name: | Arsenic | | Synonyms: | ARSENIC,LUMP,PURIFIED;INORGANICARSENIC;ARSENIC: 99.99%, PIECES;ARSENIC: 99.9999%, PIECES, APPROX. (1.5X1.5X2.5)CM;ARSENIC, POWDER, -100 MESH, 99.99%;Arsenic, Polycrystalline Lump 4-10mm;Arsenic polycrystalline lump, 2-8mm (0.08-0.3in), Puratronic(R), 99.99999+% (metals basis);Arsenic Pieces 2-12 mm | | CAS: | 7440-38-2 | | MF: | AsH3 | | MW: | 77.95 | | EINECS: | 231-148-6 | | Product Categories: | metal or element;Inorganics;Industrial/Fine Chemicals;Arsenic;Metal and Ceramic Science;Metals;A;AAS;AAS CRMsAlphabetic;AASSpectroscopy;Allergens;Application CRMs;AR to AZMethod Specific;Extractable Heavy metalsCosmetics;Oeko-Tex Standard 100;Spectroscopy | | Mol File: | 7440-38-2.mol |  |
| | Arsenic Chemical Properties |
| Melting point | 817 °C(lit.) | | Boiling point | 613 °C(lit.) | | density | 5.727 g/mL at 25 °C(lit.) | | vapor pressure | 1Pa at 280℃ | | form | powder | | color | Silver to black | | Specific Gravity | 5.727 | | Odor | Odourless | | resistivity | 33.3 μΩ-cm | | Water Solubility | insoluble | | Sensitive | Air Sensitive | | Merck | 13,802 | | Exposure limits | TLV-TWA 0.2 mg(As)/m3 (ACGIH), 0.5 mg
(As)/m3 (MSHA), 0.01 mg(As)m3 (OSHA);
ceiling 0.002 mg(As)/m3/15 min (NIOSH);
carcinogenicity: Human Sufficient Evidence
(IARC). | | Stability: | Stable. Incompatible with acids, oxidizing agents, halogens. Heat and air-sensitive. | | CAS DataBase Reference | 7440-38-2(CAS DataBase Reference) | | IARC | 1 (Vol. 23, Sup 7, 100C) 2012 | | NIST Chemistry Reference | Arsenic(7440-38-2) | | EPA Substance Registry System | Arsenic (7440-38-2) |
| Hazard Codes | T,N | | Risk Statements | 23/25-50/53-36/38-22-45-52/53-51/53 | | Safety Statements | 20/21-28-45-60-61-26-53 | | RIDADR | UN 1558 6.1/PG 2 | | WGK Germany | 3 | | RTECS | CG0525000 | | F | 10 | | TSCA | Yes | | HazardClass | 6.1 | | PackingGroup | II | | HS Code | 28048000 | | Hazardous Substances Data | 7440-38-2(Hazardous Substances Data) | | Toxicity | Human exposure occurs occupationally and via
food, tobacco smoke, ambient air, and water. Three major
groups of arsenic compounds have been defined on the basis
of biological considerations: inorganic arsenicals; organic
arsenicals; and arsine (gas). The comparative toxicity of these
groups is dependent upon the route of exposure and their solubilities;
the more quickly absorbed compounds have lower
LD50. Arsenic is readily absorbed by the respiratory and gastrointestinal
systems and is concentrated in the skin, hair, and
nails (Aldrich-Mees’ lines). The cellular toxicity of arsenic is
related to reactions with SH-containing mitochondrial enzymes
that result in impaired respiration. Arsenic may also compete
with phosphate during oxidative phosphorylation. | | IDLA | 5 mg As/m3 |
| | Arsenic Usage And Synthesis |
| Description | Arsenic is a metalloid of the nitrogen group. Two allotrope forms of elemental arsenic have been reported:
yellow arsenic and grey arsenic, the latter being usually the more stable form. Arsenic readily oxidises in
air to arsenic trioxide (As2O3). Arsenic is mostly found either in its native state or as arsenic sulfide in the
form of realgar (As4S4) or orpiment (As2S3). Arsenic can exist in three different valence states (zerovalent,
trivalent and pentavalent). Arsenic forms covalent bonds with carbon, oxygen and hydrogen. The toxicity
varies widely and depends on the physical state of the compound and its absorption/elimination rate.
Trivalent arsenics (As(III)) are derivatives of the arsenous acid (H2AsO3-arsenite) and arsenic trioxide
(AsO3). Examples of pentavalent arsenic (As(V)) include derivatives of the arsenic acid (H3AsO4 -arsenate).
Organic arsenic-based compounds, that is, compounds containing arsenic-carbon bonds, are usually less
toxic than their inorganic counterparts. This is mainly due to their quicker excretion from the human body.
Arsenic is known to be one of the most toxic heavy metals. Compounds containing arsenic have a long
history of use as poisons, but they also have a long historical medicinal use. | | Chemical Properties | Arsenic (As) is the third element in Group VA of the periodic table. Elemental arsenic can be found in two solid forms: yellow and gray or metallic, with specific gravities of 1.97 and 5.73, respectively (CRC, 1999). Gray arsenic is the ordinary stable form. Arsenic compounds can be categorized as inorganic and organic. Inorganic compounds do not contain an arsenic–carbon bond while organic compounds do.
| | Chemical Properties | Elemental arsenic, as, occurs to a limited
extent in nature as a steel-gray, amorphous metalloid. | | Physical properties | Arsenic is classed as a semimetal, meaning that it is neither a metal like aluminum or lead,nor quite a nonmetal such as oxygen, sulfur, or chlorine. Arsenic’s main allotrope is a silverygray,brittle, metal-like substance. Its other two isotopes are unstable crystalline substances.
Gray arsenic exhibits an unusual property in that its boiling point (614°C) is lower than itsmelting point (817°C). As its temperature changes, it sublimates, which means it goes fromthe solid state, skipping the liquid state, into a vapor state. Cooling the vapor of sublimation,the black allotrope condenses out and in turn changes from the black to the gray allotrope. Ifyellow arsenic is rapidly cooled from its sublimation point, yellow arsenic will condense outand will not revert back to gray arsenic upon cooling.
The following information is for the gray semimetal form of arsenic only. Its melting pointis 817°C, its sublimation point varies between 613°C and 814°C depending on the atmosphericpressure, and its density is 5.776 g/cm3. | | Isotopes | There are a total of 35 isotopes of arsenic, ranging from As-60 to As-92, withhalf-lives spanning from a few nanoseconds to 80 days. Although some references claimthere are no stable isotopes of arsenic, arsenic-75 is classed as a stable isotope thatmakes up 100% of arsenic found in the Earth’s crust. | | Origin of Name | Derived either from the Latin word arsenicum or the Greek word arsenikon,
both meaning a yellow pigment. It is possible that the Arabic word azzernikh was
also an ancient name for arsenic. | | Occurrence | Arsenic is the 53rd most abundant element and is widely distributed in the Earth’s crust.It occurs naturally in several minerals, but high-grade deposits are rare. Most of the mineralsand ores that contain arsenic also contain other metals. Some major sources of arsenic are theminerals orpiment, scherbenkobalt, arsenopyrite, niccolite, realgar, gersdorffite, and smaltite.In addition, most sulfide ores of other metals also contain some arsenic. The three major mineralsthat produce arsenic are: realgar (arsenic monosulfide, AsS), orpiment (arsenic trisulfide,As2S2), and arsenopyrite (iron arsenosulfide, FeAsS).
Today, most arsenic is recovered as a by-product from the smelting of nickel, copper, iron,and tin. It is also recovered from the flue dust of copper- and lead-smelting furnaces. | | Characteristics | Arsenic in the elemental form is a brittle, grayish crystal that becomes darker when exposedto air. It is seldom found in the pure elemental form but rather in minerals (compounds). Ithas a long history of use as a poison, and many alchemists were poisoned when using it intheir attempts to produce gold from base metals.
Arsenic has limited commercial use. | | History | Elemental arsenic occurs in two solid modifications:
yellow, and gray or metallic, with specific gravities of
1.97, and 5.75, respectively. Gray arsenic, the ordinary stable
form, has a triple point of 817°C and sublimes at 616°C and
has a critical temperature of 1400°C. Several other allotropic
forms of arsenic are reported in the literature. It is believed
that Albertus Magnus obtained the element in 1250 A.D.
In 1649 Schroeder published two methods of preparing the
element. It is found native, in the sulfides realgar and orpiment,
as arsenides and sulfarsenides of heavy metals, as the
oxide, and as arsenates. Mispickel, arsenopyrite, (FeSAs) is the
most common mineral, from which on heating the arsenic
sublimes leaving ferrous sulfide. The element is a steel gray,
very brittle, crystalline, semimetallic solid; it tarnishes in air,
and when heated is rapidly oxidized to arsenous oxide (As2O3)
with the odor of garlic. Arsenic and its compounds are poisonous.
Exposure to arsenic and its compounds should not
exceed 0.01 mg/m3 as elemental As during an 8-h work day.
Arsenic is also used in bronzing, pyrotechny, and for hardening
and improving the sphericity of shot. The most important
compounds are white arsenic (As2O3), the sulfide, Paris
green 3Cu(AsO2)2· Cu(C2H3O2)2, calcium arsenate, and lead
arsenate; the last three have been used as agricultural insecticides
and poisons. Marsh’s test makes use of the formation
and ready decomposition of arsine (AsH3). Arsenic is available
in high-purity form. It is finding increasing uses as a doping
agent in solid-state devices such as transistors. Gallium
arsenide is used as a laser material to convert electricity directly
into coherent light. Natural arsenic is made of one isotope
75As. Thirty other radioactive isotopes and isomers are
known. Arsenic (99%) costs about $75/50g. Purified arsenic
(99.9995%) costs about $50/g. | | Uses | Arsenic is a brittle solid with a metallic coloring that ranges from silver to gray. It is a naturally occurring element found in the earth’s crust, and it cycles rapidly through water, land, air, and living systems. Exposure to it occurs through ingestion, inhalation, and dermal contact.
The arsenic metalloid is used for hardening copper and lead alloys (HSDB, 2005). It is also used in glass manufacturing as a decolorizing and refining agent, as a component of electrical devices in the semiconductor industry, and as a catalyst in the production of ethylene oxide. Arsenic compounds are used as a mordant in the textile industry, for preserving hides, as medicinals, pesticides, pigments, and wood preservatives. The production of chromate copper arsenate (CCA), a wood preservative, accounts for approximately 90% of the domestic arsenic consumption (ATSDR, 2007). However, production of this preservative is being phased out. The uses of inorganic arsenical compounds (e.g., lead arsenate) as pesticides were voluntarily cancelled by the industry during late 1980s and early 1990s. A majority of organoarsenicals are used on cotton and turf as herbicides. disodium methanearsenate (DSMA), monosodium methanearsenate (MSMA), and calcium methanearsenate (CAMA) continue to be used as contact herbicides. | | Uses | Arsenic is used for hardening metals suchas copper and lead and as a doping agentin solid-state products of silicon and germanium.Its salts are used in making herbicidesand rodenticides, in semiconductors, and inpyrotechnics. Arsenic trioxide is being usedin experimental research for treating solidtumors such as gastric cancer and head andneck tumors. | | Uses | Over the years a number of practical uses for arsenic developed, particularly related toits poisonous nature. Today, it is not of great commercial value except as an insecticide andherbicide.
It is used in the semiconductor industry to coat solid-state devices. Some compounds areused in paints and fireworks. The major uses are in medicine, where its toxic properties areimportant for the treatment of diseases. | | Uses | Inorganic arsenic compounds were widely used as pesticides from the mid 1800s to the mid 1900s and were used in medicine until the 1970s, primarily for treatment of leukemia, psoriasis, and asthma. The use of arsenic for treatment of acute promyelocytic leukemia resumed in the 1990s. By the mid 1970s, arsenic use was shifting from pesticides to wood preservatives, and by 1980, wood preservatives were the primary use. Total agricultural-chemical use (in pesticides and fertilizers) declined to about 15% to 20% of total arsenic consumption by the early 1990s and has remained at about 4% since 1995 (Edelstein 1994, Reese 1998, ATSDR 2007, Brooks 2009).
Since the mid 1990s, arsenic trioxide used in wood preservation has accounted for 86% to 90% of total U.S. arsenic consumption. Wood treated with chromated copper arsenate (CCA), known as “pressure-treated wood,” has been used widely to protect utility poles, building lumber, and foundations from decay and insect attack. However, a voluntary phase-out of CCA for certain residential uses (e.g., in wood for decks, play structures, fencing, and boardwalks) that went into effect December 31, 2003, has reduced this use of arsenic. CCA continues to be used in wood products for industrial use. Other uses of arsenic in the 1990s included use in glass (3% to 4%) and nonferrous alloys (1% to 4%) (ATSDR 2007, Brooks 2009).
By the 1990s, there was renewed interest in the use of arsenic for treatment of acute promyelocytic leukemia (ATSDR 2007). Arsenic trioxide is approved by the U.S. Food and Drug Administration for treating this type of leukemia when other chemotherapy treatments have failed (MedlinePlus 2009). Arsenic is also used in the production of lead alloys used in lead-acid batteries. It may be added to alloys used for bearings, type metals, lead ammunition, and automotive body solder, and it may be added to brass to improve corrosion resistance. High-purity arsenic is used in a variety of semiconductor applications, including solar cells, light-emitting diodes, lasers, and integrated circuits (ATSDR 2007). | | Definition | A toxic metalloid element existing in
several allotropic forms; the most stable is
a brittle gray metal. It belongs to group 15
(formerly VA) of the periodic table. Arsenic
is found native and in several ores including
mispickel (FeSAs), realgar (As4S3),
and orpiment (As2S3). The element reacts
with hot acids and molten sodium hydroxide
but is unaffected by water and acids
and alkalis at normal temperatures. It is
used in semiconductor devices, alloys, and
gun shot. Various compounds are used in
medicines and agricultural insecticides and
poisons.
Symbol: As; m.p. 817°C (gray) at 3
MPa pressure; sublimes at 616°C (gray);
r.d. 5.78 (gray at 20°C); p.n. 33; r.a.m.
74.92159. | | Definition | arsenic: Symbol As. A metalloid elementof group 15 (formerly VB) ofthe periodic table; a.n. 33; r.a.m.74.92; r.d. 5.7; sublimes at 613°C. Ithas three allotropes-yellow, black,and grey. The grey metallic form isthe stable and most common one.Over 150 minerals contain arsenicbut the main sources are as impuritiesin sulphide ores and in the mineralsorpiment (As2S3) and realgar(As4S4). Ores are roasted in air toform arsenic oxide and then reducedby hydrogen or carbon to metallic arsenic.Arsenic compounds are used ininsecticides and as doping agents insemiconductors. The element is includedin some lead-based alloys topromote hardening. Confusion canarise because As4O6 is often sold aswhite arsenic. Arsenic compoundsare accumulative poisons. The elementwill react with halogens, concentratedoxidizing acids, and hot alkalis.Albertus Magnus is believed tohave been the first to isolate the elementin 1250. | | General Description | A grayish metallic solid that turns black upon exposure to air. Insoluble in water. Toxic by ingestion. | | Air & Water Reactions | Turns black on exposure to air. Insoluble in water. | | Reactivity Profile | Arsenic reacts incandescently with bromine trifluoride, even at 10°C [Mellor 2:113 1946-47]. Causes bromoazide to explode upon contact. Ignites if ground up together with solid potassium permanganate [Mellor 12:322 1946-47]. Is oxidized by sodium peroxide with incandescence [Mellor 2:490-93 1946-47]. A combination of finely divided Arsenic with finely divided bromates (also chlorates and iodates) of barium, calcium, magnesium, potassium, sodium, or zinc can explode by heat, percussion, and friction [Mellor 2:310 1946-47]. Bromine pentafluoride reacts readily in the cold with Arsenic. Ignition usually occurs. Reacts vigorously with fluorine at ordinary temperatures [Mellor 9:34 1946-47]. | | Hazard | Most of the compounds of arsenic are toxic when in contact with the skin, when inhaled,or when ingested. As with arsenic’s cousin phosphorus above it in group 15 of the periodictable, care must be taken when using arsenic. The compound arsenic trioxide (As2O3), anexcellent weed-killer, is also carcinogenic. Copper acetoarsenite, known as Paris green, is usedto spray cotton for boll weevils. A poisonous dose of arsenic as small as 60 milligrams can bedetected within the body by using the Marsh test. | | Health Hazard | One of the allotropic forms, yellow arsenic,is a severe human poison. The fatal dosein humans is 1–2 mg/kg body weight. Allarsenic compounds are toxic, the toxicityvarying with the oxidation state of themetal and the solubility. Thus, the trivalentinorganic compounds of arsenic, suchas arsenic trichloride, arsenic trioxide, andarsine, are highly toxic—more poisonousthan the metal and its pentavalent salts.The organic arsenic compound Lewisite isa severe blistering agent that can penetratethe skin and cause damage at the point ofexposure. Lewisite was used as a poison gasin World War I. Less soluble arsenic sulfideexhibits a lower acute toxicity.
Arsenic is absorbed into the body througha GI route and inhalation. The acute symptomsinclude fever, GI disturbances, irritationof the respiratory tract, ulceration of thenasal septum, and dermatitis. Chronic exposurecan produce pigmentation of the skin,peripheral neuropathy, and degeneration ofliver and kidneys.
The toxic effects of arsenic are attributedto its binding properties with sulfur. It formscomplexes with coenzymes. This inhibitsthe production of adenosine triphosphate (ATP), which is essential for energy in bodymetabolism. 2,3-Dimercapto-1-propanol isan antidote against acute intoxication. 2,3-Dithioerythritol is reported to be a moreeffective and less toxic antidote (Boyd et al.1989). Arsenic is carcinogenic to humans.Ingestion by an oral route has caused anincreased incidence of tumors in the liver,blood, and lungs. The mutagenic and genotoxiceffects of arsenic have been reviewed(Basu et al. 2001).
Peraza et al. (2003) studied toxicity andmetabolism of inorganic arsenic in kidneyat low level subcytotoxic concentrations.Human renal proximal tubule epithelial cells(HK-2) were used as model in their study.The authors found that HK-2 cells werecapable of biotransforming inorganic arseniccompounds in a pathway involving reductionof arsenate to arsenite.
Bernstam et al. (2002) measured percutaneousabsorption of As(III) and As(V) invitro using artificial human skin. The permeabilityconstant (Kp) for As(V) and As(III)were determined from this study as 4.3× 10-5 cm/h and 10.1× 10-5 cm/h respectively.As(III) at exposure doses as low as10 μg/L could cause significant morphologicalchanges, disruption of cell membrane andinhibition of deoxyribonucleic acid (DNA)and protein syntheses. The authors noted thatconcentrations of tri- or pentavalent arsenicat levels above 100 μg/L in showering- orhand-washing waters could manifest harmfuleffects. | | Flammability and Explosibility | Notclassified | | Industrial uses | Arsenic (symbol As) is a soft, brittle, poisonouselement of steel-gray color and metallic luster.In atomic structure it is a semimetal, lackingplasticity, and is used only in alloys and incompounds. The bulk of the arsenic used isemployed in insecticides, rat poisons, and weedkillers, but it has many industrial uses, especiallyin pigments. It is also used in poisongases for chemical warfare.Metallic arsenic is stable in dry air. Whenexposed to humid or moistened air, the surfacefirst becomes coated with a superficial goldenbronze tarnish, which on further exposure turnsblack. On heating in air arsenic will vaporizeand burn to As2O3. | | Safety Profile | Confirmed human
carcinogen producing liver tumors. Poison
by subcutaneous, intramuscular, and
intraperitoneal routes. Human systemic skin
and gastrointestinal effects by ingestion. An
experimental teratogen. Other experimental
reproductive effects. Mutation data
reported. Flammable in the form of dust
when exposed to heat or flame or by
chemical reaction with powerful oxidizers
such as bromates, chlorates, iodates,
peroxides, lithium, NC4, m 0 3 , Khfn04,
Rb2C2, AgN04, NOCl, IF5, CrO3, CIF3,
Cl0, BrF3, BrFj, BrN3, RbGBCH,
CsC3BCH. Slightly explosive in the form of
dust when exposed to flame. When heated
or on contact with acid or acid fumes, it
emits highly toxic fumes; can react
vigorously on contact with oxidizing
materials. Incompatible with bromine azide,
dirubidium acetylide, halogens, palladium,
zinc, platinum, NCh, AgNO3, CrO3, Na2O2,
hexafluoroisopropylideneamino lithum. | | Potential Exposure | Arsenic compounds have a variety of
uses. Arsenic and its compounds are used as an alloy additive,
in electronic devices; in veterinary medicines; in agriculture
as insecticides, herbicides, larvicides, and
pesticides. Some arsenic compounds are used in pigment
production; the manufacture of glass as a bronzing or
decolorizing agent; the manufacture of opal glass and
enamels, textile printing; tanning, taxidermy, antifouling
paints; to control sludge formation in lubricating oils.
Metallic arsenic is used as an alloying agent for heavy
metals; and in solders, medicines, herbicides. EPA has estimated
that more than 6 million people living within 12 mi
of major sources of copper, zinc, and lead smelters-may be
exposed to 10 times the average United States atmospheric
levels of arsenic. The agency says that 40,000 people living
near some copper smelters may be exposed to 100 times
the national atmospheric average. | | Carcinogenicity | Arsenic and inorganic arsenic compounds are known to be human carcinogens based on sufficient evidence of carcinogenicity in humans. | | Environmental Fate | Trivalent arsenic exerts its toxic effects mainly by disrupting
ATP production by inhibiting lipoic acid, which is a cofactor for
pyruvate as well by replacing phosphate which uncouples
oxidation phosphorylation. This inhibits the electron transport
chain in the mitochondria and the ultimate synthesis of ATP.
Hydrogen peroxide production is also increased, which, it is
speculated, has potential to form reactive oxygen species and
oxidative stress. These metabolic interferences lead to death
from multisystem cell death and organ failure. The activity of
enzymes is due to the functional groups on amino acids such as
the sulfhydryl group on cysteine or coenzymes such as lipoic
acid, which has vicinal thiol groups. Trivalent inorganic
arsenicals readily react with sulfhydryl groups such as cysteine
creating a strong complex between arsenic and vicinal sulfhydryl
reagents. These actions inhibit not only the formation of
Acetyl-CoA but also the enzymes succinic dehydrogenase and
pyruvate. Arsenite inhibits the binding of steroids to the
glucocorticoid receptor, but not other steroid receptors. The
probable mechanism of toxicity of pentavalent inorganic
arsenate is its reduction to a trivalent form, arsenite, which is
more toxic than the arsenate. Thus, a variety of mechanisms
lead arsenic to impair cell respiration and subsequently
diminish ATP formation. | | Shipping | UN1558 Arsenic, Hazard Class: 6.1; Labels:
6.1-Poisonous materials. | | Toxicity evaluation | Bioconcentration of arsenic occurs in algae and lower
invertebrates. Both bottom-feeding and predatory fish can
accumulate contaminants found in water. The major bioaccumulation
transfer is between water and algae, at the base of
the food chain that has a strong impact on the concentration in
fish. Bottom-feeders are readily exposed to the greater quantities
of arsenic, which accumulate in sediments. No differences
were found for arsenic existing between bottom-feeders and
predators in tissue levels of metals and other contaminants.
Therefore, biomagnification in aquatic food chains does not
appear to be significant. | | Incompatibilities | Incompatible with strong acids; strong
oxidizers; peroxides, bromine azide, bromine pentafluoride,
bromine trifluoride; cesium acetylene carbide, chromium
trioxide; nitrogen trichloride, silver nitrate. Can react vigorously
with strong oxidizers (chlorine, dichromate, permanganate).
Forms highly toxic fumes on contact with acids or
active metals (iron, aluminum, zinc). Hydrogen gas can
react with inorganic arsenic to form highly toxic arsine gas. | | Waste Disposal | Elemental arsenic wastes
should be placed in long-term storage or returned to
suppliers or manufacturers for reprocessing. Arsenic
pentaselenide-wastes should be placed in long-term storage
or returned to suppliers or manufacturers for reprocessing.
Arsenic trichloride: hydrolyze to arsenic trioxide utilizing
scrubbers for hydrogen chloride abatement. The trioxide
may then be placed in long-term storage. Arsenic trioxide:
long-term storage in large shiftproof and weatherproof
silos. This compound may also be dissolved, precipitated as
the sulfide and returned to the suppliers. Arsenic-containing
sewage may be decontaminated by pyrolusite treatment.
Consult with environmental regulatory agencies for guidance
on acceptable disposal practices. Generators of waste
containing this contaminant (≥100 kg/mo) must conform
with EPA regulations governing storage, transportation,
treatment, and waste disposal. In accordance with
40CFR165, follow recommendations for the disposal of
pesticides and pesticide containers. Must be disposed properly
by following package label directions or by contacting
your local or federal environmental control agency, or by
contacting your regional EPA office. |
| | Arsenic Preparation Products And Raw materials |
|
