|
| | 1,3-Butadiene Basic information |
| | 1,3-Butadiene Chemical Properties |
| Melting point | −109 °C(lit.) | | Boiling point | −4.5 °C(lit.) | | density | 0.62 g/mL at 20 °C(lit.) | | vapor density | 1.9 (15 °C, vs air) | | vapor pressure | 1863 mm Hg ( 21 °C) | | refractive index | 1.4292 | | Fp | −105 °F | | storage temp. | 0-6°C | | solubility | water: soluble0.5g/L at 20°C | | form | Colorless gas | | color | Colorless to Almost colorless | | Odor Threshold | 0.23ppm | | explosive limit | 12% | | Water Solubility | 735mg/L(25 ºC) | | FreezingPoint | -108.91℃ | | Merck | 14,1509 | | BRN | 605258 | | Henry's Law Constant | (x 10-2 atm?m3/mol):
6.3 at 25 °C (Hine and Mookerjee, 1975) | | Exposure limits | TLV-TWA 10 ppm (～22 mg/m3) (ACGIH),
1000 ppm (OSHA and NIOSH); IDLH
20,000 ppm (NIOSH); A2–Suspected Human
Carcinogen (ACGIH). | | Stability: | Stable. Extremely flammable. May form explosive mixtures with air. Incompatible with strong oxidizing agents, copper, copper alloys. May contain stabilizer. | | InChIKey | KAKZBPTYRLMSJV-UHFFFAOYSA-N | | LogP | 1.99 at 20℃ | | CAS DataBase Reference | 106-99-0(CAS DataBase Reference) | | IARC | 1 (Vol. Sup 7, 54, 71, 97, 100F) 2012 | | EPA Substance Registry System | 1,3-Butadiene (106-99-0) |
| | 1,3-Butadiene Usage And Synthesis |
| Description | 1,3-Butadiene is a simple conjugated diene. It is a colourless gas with a mild aromatic or gasoline-like odour and incompatible with phenol, chlorine dioxide, copper, and crotonaldehyde. The gas is heavier than air and may travel along the ground; distant ignition is possible. It is an important industrial chemical used as a monomer in the production of synthetic rubber. Most butadiene is polymerised to produce synthetic rubber. While polybutadiene itself is a very soft, almost liquid, material, polymers prepared from mixtures of butadiene with styrene or acrylonitrile, such as ABS, are both tough and elastic. Styrene–butadiene rubber is the material most commonly used for the production of automobile tyres. Smaller amounts of butadiene are used to make nylon via the intermediate adiponitrile, other synthetic rubber materials such as chloroprene, and the solvent sulpholane. Butadiene is used in the industrial production of cyclododecatriene via a trimerisation reaction.
1,3-Butadiene structure
| | Chemical Properties | Butadiene is a gas, b.p. -4°C. | | Physical properties | Colorless gas with a mild, aromatic or gasoline-like odor. Experimentally determined detection
and recognition odor threshold concentrations were 1.0 mg/m3 (0.45 ppmv) and 2.4 mg/m3 (1.1
ppmv), respectively (Hellman and Small, 1974). | | Uses | Synthetic elastomers (styrene-butadiene, polybutadiene, neoprene, nitriles), ABS resins, chemical intermediate.
1,3-Butadiene can undergo a four-component coupling reaction with aryl Grignard reagents, and alkyl fluorides in the presence of nickel catalyst to form 1,6-octadiene carbon compound substituted with alkyl and aryl groups at the 3- and 8-positions.
1,3-Butadiene is a useful diene for Diels Alder reaction.
It may be used in the synthesis of the following:
- 1-Silyl-substituted 1,3-butadienes, by [RuHCl(CO)(PCy3)2]-catalyzed silylative coupling of terminal (E)-1,3-dienes with vinylsilanes.
- Synthetic rubber and thermoplastic resins.
- Disilylated dimers by reacting with chlorosilanes.
- Octa-2,7-dien-1-ol via palladium catalyzed-hydrodimerization.
| | Uses | One major use of 1,3-butadiene has been in the
making of synthetic rubber. Among the types of
synthetic rubber made with 1,3-butadiene are
styrene-butadiene and nitrile-butadiene rubbers.
Cis-polybutadiene is also an extender and substitute
for rubber, and trans-polybutadiene is a
type of rubber with unusual properties.
1,3-Butadiene is also used extensively for
various polymerizations in manufacturing plastics.
It combines with activated olefins in the
Diels-Alder reaction to give hydroaromatic hydrocarbons.
1,3-Butadiene undergoes 1,4 cyclization
with reactants containing sulfur, oxygen,
and nitrogen. | | Uses | 1,3-Butadiene is a petroleum product obtainedby catalytic cracking of naphtha orlight oil or by dehydrogenation of buteneor butane. It is used to produce butadiene–styrene elastomer (for tires), syntheticrubber, thermoplastic elastomers, foodwrapping materials, and in the manufactureof adiponitrile. It is also used forthe synthesis of organics by Diels–Aldercondensation. | | Production Methods | Except for a small amount of butadiene produced by the
oxydehydrogenation of n-butane, most of butadiene is produced
commercially as a by-product of ethylene production
during the steam cracking of hydrocarbon streams. It is
separated and purificated from other components by extractive
distillation, using acetonitrile and dimethylformamide as
solvents. | | Definition | ChEBI: 1,3-Butadiene is a butadiene with unsaturation at positions 1 and 3. It is a chemical made from the processing of petroleum. About 75% of the manufactured 1,3-butadiene is used to make synthetic rubber. Synthetic rubber is widely used for tires on cars and trucks. | | Preparation | Butadiene is obtained when n-butenes are dehydrogenated: 
n-Butenes are mostly obtained from the catalytic cracking operations carried
out on various petroleum fractions; thermal cracking processes usually give
low yields of butenes. The dehydrogenation of n-butenes is carried out by
mixing the feed with steam (which lowers the partial pressures of the
reactants) and passing over a catalyst such as mixed calcium/nickel phosphate stabilized with chromium oxide at about 650??C. | | General Description | 1,3-Butadiene is a colorless gas with a mild, aromatic, gasoline-like odor. It is shipped as a liquefied gas under its vapor pressure. Contact with the liquid can cause frostbite. It is easily ignited. Its vapors are heavier than air and a flame can flash back to the source of leak very easily. It can asphyxiate by the displacement of air. It must be shipped inhibited as butadiene is liable to polymerization. If polymerization occurs in the container, It may violently rupture. Under prolonged exposure to fire or intense heat the containers may rupture violently and rocket. It is used to make synthetic rubber and plastics, and to make other chemicals. | | Air & Water Reactions | Highly flammable. In contact with air, butadiene may form violently explosive peroxides, which can be exploded by mild heat or shock. Solid butadiene absorbs enough oxygen at sub atmospheric pressures to make 1,3-BUTADIENE explode violently when heated just above its melting point [Ind. Eng. Chem. 51:733 1959]. | | Reactivity Profile | A colorless gas, 1,3-BUTADIENE can react with oxidizing reagents. Upon long exposure to air 1,3-BUTADIENE forms explosive peroxides. They are sensitive to heat or shock; sudden polymerization may occur [Scott, D. A., Chem. Eng. News, 1940, 18, p.404]. Butadiene polyperoxides are insoluble in liquefied butadiene (m. p. -113° C, b. p. -2.6° C) and progressively separate leading to local concentration build up. Self-heating from a spontaneous decomposition will lead to explosion [Hendry, D. G. et al., Ind. Eng. Chem., 1968, 7, p. 136, 1145]. Explodes on contact with aluminum tetrahydroborate, potentially explosive reaction with chlorine dioxide (peroxide) and crotonaldehyde (above 180° C). Reaction with sodium nitrite forms a spontaneously flammable product [Sax, 9th ed., 1996, p. 539]. | | Hazard | A confirmed carcinogen. Irritant in high
concentration. Highly flammable gas or liquid,
explosive limits in air 2–11%. May form explosive
peroxides on exposure to air. Must be kept inhibited
during storage and shipment. Inhibitors often used
are di-n-butylamine or phenyl-β-naphthylamine.
Storage is usually under pressure or in insulated
tanks <35F (<1.67C).
| | Health Hazard | The toxicity of 1,3-butadiene has been foundto be very low in humans and animals. It isan asphyxiant. In humans, low toxic effectsmay be observed at exposure to 2000 ppmfor 7 hours. The symptoms may be hallucinations,distorted perception, and irritation ofeyes, nose, and throat. Higher concentrationsmay result in drowsiness, lightheadedness,and narcosis. High dosages of 1,3-butadienewas toxic to animals by inhalation and skincontact. General anesthetic effects and respiratorydepression were noted. Concentrationsof 25–30% may be lethal to rats and rabbits.Contact with the liquefied gas can cause burnand frostbite.
Exposure to 1,3-butadiene caused cancersin the stomach, lungs, and blood in ratsand mice. It is suspected to be a humancarcinogen. It is a mutagen and a teratogen. | | Fire Hazard | Behavior in Fire: Vapors heavier than air and may travel a considerable distance to a source of ignition and flashback. Containers may explode in a fire due to polymerization. | | Flammability and Explosibility | Extremelyflammable | | Biochem/physiol Actions | Environmental carcinogen. Induces cardiac hemangiosarcomas in mice. | | Materials Uses | 1,3-Butadiene is noncorrosive and may be used
with any common metals. Steel is recommended
for tanks and piping in butadiene service by
some authorities. If used with plastics, compatibility
must be confirmed. Welded rather than
threaded connections are similarly recommended
because 1,3-butadiene tends to leak
through even extremely small openings. If
threaded connections are used, Schedule 80
pipe should be used. Before being exposed to
1,3-butadiene that is not inhibited, iron surfaces
should be treated with an appropriate reducing
agent such as sodium nitrite because polymerization
is accelerated by oxygen (even if present
as in ferrous oxide), as well as by heat. | | Safety Profile | Confirmed carcinogen
with experimental carcinogenic and
neoplastigenic data. An experimental
teratogen. Mutation data reported.
Inhalation of high concentrations can cause
unconsciousness and death. Human
systemic effects by inhalation: cough,
hallucinations, dstorted perceptions,
changes in the visual field and other | | Physiological effects | If inhaled in high concentrations, 1,3-butadiene
has an anesthetic or mild narcotic action, which
appears to vary with individuals. Inhalation of a
I percent concentration in air has been reported
to have had no effect on the respiration or blood
pressure of individuals. However, such exposure
may cause the pulse rate to quicken and
give a sensation of prickling and dryness in the
nose and mouth. Inhalation in higher concentrations
has brought on blurring of vision and nausea
in some persons. Inhalation in excessive
amounts leads to progressive anesthesia, irritation
of eyes, lungs, and nasal passages. Exposure
to a 25 percent concentration for 23 minutes
proved fatal in one instance. No cumulative
action on the blood, lungs, liver, or kidneys has
been reported. Because 1,3-butadiene liquid
evaporates rapidly, prolonged contact between
liquid butadiene and the skin causes freezing of
the tissue. Delayed skin bums may result if liquid
butadiene is allowed to remain trapped in
clothing or in shoes.
OSHA has concluded that there is strong evidence
that workplace exposure to 1,3-butadiene
poses an increased risk of death from cancers of
the Iymphokematopoietic system. ACGIH
has classified 1,3-butadiene as a "suspected
human carcinogen" . The National Toxicology
Program has classified 1,3-butadiene as
showing clear evidence of carcinogenicity. | | Carcinogenicity | 1,3-Butadiene is known to be a human carcinogen based on sufficient evidence of carcinogenicity from studies in humans, including epidemiological and mechanistic studies. 1,3-Butadiene was first listed in the Fifth Annual Report on Carcinogens in 1989 as reasonably anticipated to be a human carcinogen based on sufficient evidence of carcinogenicity from studies in experimental animals. The listing was revised to known to be a human carcinogen in the Ninth Report on Carcinogens in 2000. | | Source | Schauer et al. (2001) measured organic compound emission rates for volatile organic compounds, gas-phase semi-volatile organic compounds, and particle-phase organic compounds
from the residential (fireplace) combustion of pine, oak, and eucalyptus. The gas-phase emission
rate of 1,3-butadiene was 177 mg/kg of pine burned. Emission rates of 1,3-butadiene were not
measured during the combustion of oak and eucalyptus. | | Environmental fate | Surface Water. The estimated volatilization half-life of 1,3-butadiene in a model river 1 m deep,
flowing 1 m/sec and a wind speed of 3 m/sec is 3.8 h (Lyman et al., 1982).
Photolytic. The following rate constants were reported for the reaction of 1,3-butadiene and OH
radicals in the atmosphere: 6.9 x 10-11 cm3/molecule·sec (Atkinson et al., 1979) and 6.7 x 10-11
cm3/molecule·sec (Sablji? and Güsten, 1990). Atkinson and Carter (1984) reported a rate constant
of 6.7–8.4 x 10-11 cm3/molecule·sec for the reaction of 1,3-butadiene and ozone in the atmosphere.
Photooxidation reaction rate constants of 2.13 x 10-13 and 7.50 x 10-18 cm3/molecule·sec were
reported for the reaction of 1,3-butadiene and NO3 (Benter and Schindler, 1988; Sablji? and
Güsten, 1990). The half-life in air for the reaction of 1,3-butadiene and NO3 radicals is 15 h
(Atkinson et al., 1984a).
Chemical/Physical. Will polymerize in the presence of oxygen if no inhibitor is present
(Hawley, 1981). | | storage | 1,3-Butadiene is stored in a cool and wellventilatedlocation separated from combustibleand oxidizing substances. Smallamounts of stabilizers, such as o-dihydroxybenzene,p-tert-butylcatechol, or aliphaticmercaptans, are added to prevent its polymerizationor peroxides formation. The cylindersare stored vertically and protected againstphysical damage. | | Toxicity evaluation | Butadiene is a gas under normal environmental conditions
with limited water solubility (735 mg l-1 at 25°C). Butadiene
released to the atmosphere will remain there with very
small amounts being distributed to water and soil. In air,
butadiene will be removed by reaction with photochemically
produced hydroxyl radicals (5.6-h half-life), nitrate radicals
(15-h half-life), and ozone (1.5-day half-life). When released
to water, butadiene will be removed by volatilization to air
(Henry’s law constant of 7460 Pam3 mol-1), biodegradation
(aerobic half-life of 15 days), and reaction with singlet oxygen. Based on its estimated organic carbon partition
coefficient (Koc of 288), butadiene will not exhibit significant
adsorption to soil or suspended particulate matter; its
biodegradation half-life in soil is estimated to be 30 days.
Due to volatilization to air and degradation in soil, butadiene
is not expected to leach to groundwater. As butadiene is
readily metabolized, it is not expected to pose a significant
bioaccumulation hazard. | | Waste Disposal | Disposal of l,3-butadiene by venting, incineration,
using a suitable flare system, or by other
means may be subject to permitting by federal,
state, provincial, or local regulations. Persons
involved with disposal of 1,3-butadiene should
check with the environmental authorities having
jurisdiction to determine the applicability of
permitting regulations to disposal activities. | | GRADES AVAILABLE | 1,3-Butadiene is available for commercial and
industrial use in various grades having much the
same component proportions from one producer
to another.
All grades contain approximately lIS ppm of
a polymerization inhibitor, such as tertiary-
butylcathechol. Distillation or washing with
dilute caustic solution is used for removing the
inhibitor when necessary. |
| | 1,3-Butadiene Preparation Products And Raw materials |
| Raw materials | Toluene-->Nitrogen-->Acetonitrile-->PETROLEUM ETHER-->Calcium carbide-->n-Butane | | Preparation Products | Sulfolane-->Hexamethylenediamine-->Styrene Butadiene Rubber-->DOWEX(R) 1X8-->4-Vinylcyclohexene dioxide-->FUSEL OIL-->1-BUTENE-->N-Hydroxymethyl-3,4,5,6-tetrahydrophthalimide-->2-(2-CHLOROETHOXY)-BENZENESULFONAMIDE-->Captan-->Adiponitrile-->Menadione-->cis-1,2,3,6-Tetrahydrophthalic anhydride-->Maleic hydrazide-->Cross-linking agent-->1,2,5,6,9,10-Hexabromocyclododecane-->2-BUTANOL-->Dodecanedioic acid-->5-ETHYLIDENE-2-NORBORNENE-->N,N,N',N'-TETRAMETHYL-2-BUTENE-1,4-DIAMINE-->Methacrylonitrile-->modified filling agent SBR-->CYCLODODECANE-->1,2,3,6-Tetrahydrophthalic anhydride-->Muscone-->POLYBUTADIENE DIACRYLATE-->ABS Resins-->1,4-HEXADIENE-->3-SULFOLENE-->Polyvinylpyrrolidone-->butadiene resin emulsion LHYJ-DS50-->Cyclododeca-1,5,9-triene-->2,4,4-TRIMETHYL-1-PENTENE-->Ti(Co)Ziegler catalyst-->Carboxy styrene-butadiene latex-->IRONE-->butadiene-styrene latex-->VITAMIN K4-->1,2,3,4-Tetrabromobutane |
|
