Hexaammonium molybdate

Hexaammonium molybdate Basic information
Physical Properties Uses Preparation Reactions
Product Name:Hexaammonium molybdate
Synonyms:MOLYBDIC ACID AMMONIUM SALT;PHOSPHATE MONITOR SECOND REAGENT;Ammoinumheptamolybdate;ammoniumheptamolybdate((nh4)6mo7o24);ammoniummolybdate(ii)((nh4)6mo7o24);ammoniummolybdate(vi);ammoniummolybdate(vi)((nh4)6mo7o24);Ammoniummolybdate,tetrahydra
CAS:12027-67-7
MF:H4Mo7NO24(-5)
MW:1073.67
EINECS:234-722-4
Product Categories:inorganic compound;Industrial/Fine Chemicals;Application CRMs;ICP CRMsAlphabetic;ICP-OES/-MS;ICPSpectroscopy;M;METI - MZ;Spectroscopy;AAS;AAS CRMsAlphabetic;AASSpectroscopy;Chemistry;Inorganics
Mol File:12027-67-7.mol
Hexaammonium molybdate Structure
Hexaammonium molybdate Chemical Properties
Melting point 190°C
density 2,498 g/cm3
storage temp. Store at RT.
solubility H2O: soluble
form Liquid
Specific Gravity2.498
color Clear light colored
Water Solubility Freely soluble in water.
Merck 14,533
Exposure limitsACGIH: TWA 0.5 mg/m3
NIOSH: IDLH 1000 mg/m3
Stability:Stable.
CAS DataBase Reference12027-67-7(CAS DataBase Reference)
EPA Substance Registry SystemMolybdate (Mo7O246-), ammonium (1:6) (12027-67-7)
Safety Information
Hazard Codes Xi
Risk Statements 22-36/38-52/53-36/37/38
Safety Statements 26-36
RIDADR UN 3264
WGK Germany -
RTECS QA4900000
TSCA Yes
HS Code 28417010
Hazardous Substances Data12027-67-7(Hazardous Substances Data)
Toxicitymic-esc 2 mmol/L MUREAV 31,185,1975
MSDS Information
ProviderLanguage
Hexaammonium molybdate English
ALFA English
Hexaammonium molybdate Usage And Synthesis
Physical PropertiesColorless, monoclinic crystal; density 2.276 g/cm3; decomposes on heating; soluble in water (decomposes); also soluble in acid; insoluble in alcohol and liquid ammonia.
UsesAmmonium molybdates are used to prepare high purity grade molybdenum metal powder, sheet, or wire; for colorimetric analysis of phosphates and arsenates; for decorating ceramics; and as catalysts.
PreparationAmmonium molybdate is prepared by treating molybdenum oxide with excess ammonia in an aqueous solution. The crystals are obtained after evaporation of water.
MoO3 + 2NH3 + H2O → (NH4)2MoO4
ReactionsDecomposes on heating or on treatment with alkalies; reacts with lead chloride and other metal salts to form their metal molybdates:
(NH4)2MoO4 + PbCl2 → PbMoO4 + 2NH4Cl
Reacts with phosphates or arsenates to form ammonium phosphomolybdate (NH4)3PO4•12MoO3, or ammonium arsenomolybdate, (NH4)3AsO4•12MoO3.

Chemical PropertiesAmmonium heptamolybdate is an odourless crystalline compound ranging in colour from white to yellow-green. It is usually encoutered as the tetrahydrate, whose chemical formula is (NH4)6Mo7O24·4H2O. It is often referred to simply as ammonium molybdate, although this name can also refer to ammonium orthomolybdate, (NH4)2MoO4, and several other species.
General DescriptionWhite to greenish-yellow solid. Sinks and mixes with water.
Air & Water ReactionsWater soluble.
Reactivity ProfileSalts, basic, such as Hexaammonium molybdate , are generally soluble in water. The resulting solutions contain moderate concentrations of hydroxide ions and have pH's greater than 7.0. They react as bases to neutralize acids. These neutralizations generate heat, but less or far less than is generated by neutralization of the bases in reactivity group 10 (Bases) and the neutralization of amines. They usually do not react as either oxidizing agents or reducing agents but such behavior is not impossible.
Health HazardInhalation causes irritation of nose and throat. Contact with eyes causes irritation.
Fire HazardSpecial Hazards of Combustion Products: Toxic oxides of nitrogen may form in fire.
Flammability and ExplosibilityNotclassified
Agricultural UsesAmmonium molybdate, (NH4)6MO7O24·2H2O is an important molybdenum fertilizer. It is an ammonium salt of molybdic acid and contains about 50% molybdenum.
Ammonium molybdate is generally mixed with NPK fertilizers, depending on the crop requirement (generally 50 to l000 gm per ha). The fertilizer is also applied as a foliar spray, but coating or soaking seeds with ammonium molybdate is the easiest method of application, which requires very little fertilizer.
Safety ProfileMutation data reported. Whenheated to decomposition it emits toxic vapors of Mo andNH3.
Hexaammonium molybdate Preparation Products And Raw materials
Raw materialsAmmonium molybdate
Preparation ProductsMolybdenum trioxide-->Molybdenum-->catalysts for acrolein oxidation to acrylic acid
AMMONIUM MOLYBDATE - SOLUTION 50 G/L SILICA ANALYSER AMMONIUM MOLYBDATE SOLN (ASCORBIC CHEM.) FOR KENT EIL PHOSPHOMOLYBDIC ACID AMMONIUM MOLYBDATE TETRAHYDRATE ACS REAG Hexaammonium molybdate VS-6010 AMMONIUM MOLYBDATE AMMONIUM MOLYBDATE ((NH4)6MO7O24 X 4 H2O) 99.999% 5G AMMONIUM MOLYBDATE METAVANADATE REAGENT SILICA ANALYSER AMMONIUM MOLYBDATE SOLUTION AMMONIUM MOLYBDATE - VANADATE CERIC AMMONIUM MOLYBDATE SOLUTION (CONTAINS H2SO4)[FOR TLC STAIN] CERIC AMMONIUM MOLYBDATE AMMONIA/AMMONIUM MOLYBDATE PHOSPHOMOLYBDIC ACID AMMONIUM MOLYBDATE REAGENT #2 Basic ammonium molybdate SILICA ANALYSER AMMONIUM MOLYBDATE SOLN (ANSA CHEMISTRY) FOR KENT EIL AMMONIUM MOLYBDATE ((NH4)6MO7O24 X 4 H2O) 99.999% 20G Ammonium Heptamolybdate

Email:[email protected] [email protected]
Copyright © 2024 Mywellwork.com All rights reserved.