Cyclopropane

Cyclopropane Basic information
Chemical Properties History Solubility constants Uses Reactions Preparation
Product Name:Cyclopropane
Synonyms:TRIMETHYLENE;CYCLOPROPANE, 99+%;cyclopropane,liquefied;Cyclopropnane;Trimethylene (cyclic);trimethylene(cyclic);CYCLOPROPANE;Cyclopropane ISO 9001:2015 REACH
CAS:75-19-4
MF:C3H6
MW:42.08
EINECS:200-847-8
Product Categories:Organics;Chemical Synthesis;Compressed and Liquefied Gases;Synthetic Reagents;Chemical Synthesis;Specialty Gases;Synthetic Reagents
Mol File:75-19-4.mol
Cyclopropane Structure
Cyclopropane Chemical Properties
Melting point −128 °C(lit.)
Boiling point −33 °C(lit.)
density 0.6190
vapor density 1.45 (vs air)
refractive index 1.3799
pka46(at 25℃)
explosive limit10.4%
Water Solubility 464mg/L(25 ºC)
Merck 13,2777
InChIKeyLVZWSLJZHVFIQJ-UHFFFAOYSA-N
CAS DataBase Reference75-19-4
EPA Substance Registry SystemCyclopropane (75-19-4)
Safety Information
Hazard Codes F+
Risk Statements 12
Safety Statements 9-16-33
RIDADR UN 1027 2.1
WGK Germany 1
RTECS GZ0690000
Autoignition Temperature928 °F
HazardClass 2.1
HS Code 2903898090
Hazardous Substances Data75-19-4(Hazardous Substances Data)
ToxicityLCLo inhalation in mouse: 282gm/m3/2H
MSDS Information
ProviderLanguage
SigmaAldrich English
Cyclopropane Usage And Synthesis
Chemical PropertiesCyclopropane is the simplest possible cyclical hydrocarbon. Though saturated, its cyclical structure endows it with some of the properties associated with unsaturated compounds. It is relatively stable chemically, does not isomerize or polymerize during prolonged storage under normal conditions, and does not react with soda lime in the presence of heat. The gas is colourless, sweet smelling and, in concentrations in excess of 50 percent, is slightly irritant to respiratory mucosa. The molecular weight of the gas is 42.08 and the vapour density (air=1.0) is 1-75 at 20°C (Macintosh, Mushin and Epstein, 1963). The boiling point of liquid cyclopropane is -33°C at a pressure of 760 Torr, and the critical temperature is 125°C. The critical pressure is 54 atmospheres, but at room temperature the gas liquefies when exposed to pressures of 5 lb./sq.in.
Cyclopropane cyclical structure
As supplied, the gas is 99.5 percent or more pure, but possible impurities include propylene, allene, cyclohexane, nitrogen, carbon dioxide, and bromor chloropropane. Propylene is the most important contaminant, up to 1 per cent being acceptable, but concentrations over 3 per cent are toxic.
HistoryCyclopropane was discovered by Freund (1882), but the anaesthetic properties of hydrocarbons with the general formula CnH2n were appreciated earlier. John Snow (1858), for example, administered amylene (C5H10) to 238 patients. In 1923, ethylene (C2H4) was introduced into clinical anaesthesia, but its low potency and inflammability restricted its use. At the University of Toronto, research by G. H. W. Lucas and V. E. Henderson on propylene (CH3.CH:CH2) revealed certain samples to show marked cardiac toxicity. Lucas suggested that the toxicity might arise from one of the impurities present in the samples, the cyclic isomer of propylene, cyclopropane. Pure samples of cyclopropane were prepared and this, when tested by Lucas and Henderson, proved to be a more potent and suitable anaesthetic agent than propylene.
Solubility constants

Cyclopropane is sparingly soluble in water, but strongly lipophilic. This is shown by a water/gas partition coefficient of 0-204 (Orcutt and Seevers, 1937) and an oil/gas coefficient of 11-2 (Blumberg et al., 1952). The strong lipoid and protein afiBnities of the gas lead not only to the carriage of 2-5 times more cyclopropane by red cells than plasma, but also to a blood/gas partition coefficient which varies with both the haemoglobin concentration and the plasma fat content of blood (Robbins, 1958). The Ostwald solubility coefficient for cyclopropane and whole blood at 37℃, and with 15g Hb per 100 ml, is 0-415 (Posati and Faulconer, 1958).

UsesCyclopropane is a powerful, nonirritating agent which can produce anaesthesia in a few breaths. It has been used used as an anesthetic, but this use has been discontinued because the gas is dangerous to manufacture and handle.
Cyclopropane has been used as the pseudo-π unsaturated hydrocarbon prototype to study the rotational spectrum of its complex formed with chlorine monofluoride and the similarity of this complex with isotopomers.
ReactionsCyclopropane and cyclobutane are gases at ordinary temperatures; the remaining cycloalkanes are liquids. Their melting points and boiling points show a gradual rise with the increase in molecular weight.
Addition of Cl2 and Br2: Cydopropane reacts with Cl, and Br, at room temperature and in the absence of diffused sunlight to produce 1,3- dichlorocyclopropane and 1,3-dibromocyclopropane respective.
Cyclopropane reacts with HBr and HI to give 1-bromopropane and 1-iodopropane.
Cyclopropane and cyclobutane reaction
Cyclopropane and cyclobutane react with hydrogen in the presence of a nickel catalyst to produce propane and n-butane respectively.
PreparationStroll quantities of cyclopropane have been prepared from natural deposits of the gas in the United States, but current practice involves the reaction of trimethylene glycol with hydrobromic acid to form1,3-Dibromopropane. The latter compound, in the presence of zinc dust, converts to the cyclic compound, cyclopropane.
DescriptionCyclopropane (molecular formula: C3H6) is a kind of cycloalkane molecule. Cyclopropane and propene are isomers of each other. It can be used as a kind of anaesthetic. However, due to its side effect of causing a sudden decrease in blood pressure and potentially causing cardiac dysrhythmia, it has not been available for clinical use since mid-1980 as more. Its mechanism of action is through acting as the NMDA receptor antagonist as well as inhibiting the AMPA receptor, inhibiting the nicotine acetylcholine receptor, and activates certain K2P channels.
Chemical PropertiesCyclopropane is a colourless gas, C3H6, b.p. –34.5°C, whose moleculescontain a triangular ring of carbonatoms. It is made by treating 1,3-dibromopropanewith zinc metal, andis used as a general anaesthetic.
UsesCyclopropane was initially investigated because it was thought to be the toxic element in ethylene. Instead, it turned out to be an excellent anesthetic with very rapid onset and recovery while maintaining stable hemodynamics. Its use was ultimately limited because it was highly explosive. Cyclopropane is a sweet-smelling, flammable gas that has little or no laboratory, commercial, or industrial use.
DefinitionChEBI: Cyclopropane is a cycloalkane composed of three carbon atoms to form a ring. It has a role as an inhalation anaesthetic. It is a cycloalkane and a member of cyclopropanes.
Production MethodsCyclopropane is prepared in reagent grade by the reduction of 1,2-dibromocyclopropane with zinc and alcohol.
General DescriptionCyclopropane is a colorless gas with a petroleum-like odor. It is shipped as a liquid at 4-6 atms. It is easily ignited. The vapors are heavier than air. Contact with the liquid may cause frostbite. It can asphyxiate by the displacement of air and has a narcotic effect in high concentration (formerly used as an anesthetic gas). Under prolonged exposure to fire or intense heat the containers may rupture violently and rocket.
Air & Water ReactionsHighly flammable. Insoluble in water.
Reactivity ProfileCYCLOPROPANE is incompatible with strong oxidizing agents such as nitric acid. Boiling of the liquid and charring may occur followed by ignition of remaining material and other nearby combustibles. Adsorbed readily by concentrated sulfuric acid [Merck]. In other settings, mostly unreactive. Not affected by aqueous solutions of acids, alkalis, most oxidizing agents, and most reducing agents. When heated sufficiently or when ignited in the presence of air, oxygen or strong oxidizing agents, burns exothermically to produce carbon dioxide and water. Mixtures with oxygen or air may explode [Merck]. Contact of the cold liquefied gas with water may result in vigorous or violent boiling and extremely rapid vaporization due to the large temperature differences involved. If the water is hot, a liquid "superheat" explosion may occur. Pressures may build to dangerous levels if the liquid contacts water in a closed container, [Handling Chemicals Safely, 1980. p. 250].
Health HazardInhalation causes some analgesia, anesthesia, pupil dilation, shallow depth of respirations, decreasing muscle tone. Contact with liquid may cause frostbite.
Fire HazardEXTREMELY FLAMMABLE. Will be easily ignited by heat, sparks or flames. Will form explosive mixtures with air. Vapors from liquefied gas are initially heavier than air and spread along ground. CAUTION: Hydrogen (UN1049), Deuterium (UN1957), Hydrogen, refrigerated liquid (UN1966) and Methane (UN1971) are lighter than air and will rise. Hydrogen and Deuterium fires are difficult to detect since they burn with an invisible flame. Use an alternate method of detection (thermal camera, broom handle, etc.) Vapors may travel to source of ignition and flash back. Cylinders exposed to fire may vent and release flammable gas through pressure relief devices. Containers may explode when heated. Ruptured cylinders may rocket.
Safety ProfileMutation data reported. Questionable carcinogen. High concentrations are narcotic. Human reproductive effects. Very dangerous fire hazard when exposed to heat or flame; can react with oxidizing materials. Explosion Hazard: Moderate in the form of vapor when exposed to heat or flame. To fight fire, stop flow of gas, then use CO2, dry chemical, or water spray. When heated to decomposition it emits acrid smoke and fumes.
Potential ExposureCyclopropane is used as an anesthetic and used to make other chemicals.
ShippingUN1027 Cyclopropane, Hazard Class: 2.1; Labels: 2.1-Flammable gas. Cylinders must be transported in a secure upright position, in a well-ventilated truck. Protect cylinder and labels from physical damage. The owner of the compressed gas cylinder is the only entity allowed by federal law (49CFR) to transport and refill them. It is a violation of transportation regulations to refill compressed gas cylinders without the express written per- mission of the owner.
Purification MethodsWash cyclopropane with a solution of HgSO4 and dry it with CaCl2, then Mg(ClO4)2. It is an anaesthetic FLAMMABLE gas and is packaged in steel cylinders. [Rifi Org Synth Coll 52 22 1972, Simmons & Smith J Am Chem Soc 80 5323 1958, Beilstein 5 H 15.]
IncompatibilitiesMay form explosive mixture with air. Heat, flame, or contact with oxidizers can cause fire and explosion hazard. May accumulate static electrical charges, and may cause ignition of its vapors. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materi- als, strong bases, strong acids, oxoacids, epoxides.
Waste DisposalReturn refillable compressed gas cylinders to supplier.
Referenceshttps://en.wikipedia.org/wiki/Cyclopropane
Cyclopropyl phenyl ketone diethyl cyclopropane-1,2-dicarboxylate (4-Methoxybenzoyl)cyclopropane 4-Chlorophenyl cyclopropyl ketone 1-PHENYL-1-CYCLOPROPANECARBONITRILE LABOTEST-BB LT00452529 Cyclopropane, phenyl- TRANS-2-PHENYLCYCLOPROPYL ISOCYANATE ETHYL 2-FORMYL-1-CYCLOPROPANECARBOXYLATE 4-Nitropyrazole CYCLOPROPYL DIPHENYL CARBINOL 2,2-DICHLORO-1-METHYLCYCLOPROPANECARBOXYLIC ACID METHYL 2,2-DICHLORO-1-METHYLCYCLOPROPANECARBOXYLATE Dicyclopropyl ketone Cyclopropanecarboxylic acid Cyclopropane, bromo- Cyclopropane-1,1-dimethanol Cyclopropanecarbonitrile

Email:[email protected] [email protected]
Copyright © 2024 Mywellwork.com All rights reserved.