|
| | Silicon monoxide Basic information |
| | Silicon monoxide Chemical Properties |
| Melting point | 1870 °C | | Boiling point | 1880°C | | density | 2.13 g/mL at 25 °C (lit.) | | refractive index | 1.9800 | | Fp | 1880°C | | form | powder | | color | Black | | Specific Gravity | 2.13 | | Water Solubility | Insoluble in water. | | Hydrolytic Sensitivity | 1: no significant reaction with aqueous systems | | Merck | 14,8496 | | Stability: | Stable. | | CAS DataBase Reference | 10097-28-6(CAS DataBase Reference) | | NIST Chemistry Reference | Silicon monoxide(10097-28-6) | | EPA Substance Registry System | Silylene, oxo- (10097-28-6) |
| Hazard Codes | Xi | | Risk Statements | 36/37/38 | | Safety Statements | 26-36 | | WGK Germany | 3 | | TSCA | Yes |
| | Silicon monoxide Usage And Synthesis |
| Chemical Properties | Silicon monoxide (SiO) is another oxide of silicon, used rarely in silicon processing but quite often in thin film, hybrid Ie manufacture. It is useful there because no silicon is available for in situ growth of the dioxide, and it is deposited easily by physical vapor deposition, a process quite similar to the vacuum deposition of aluminum described. Usually the condensed oxide is nonstoichiometric, being a mixture of SiO, Si02, and Si; often, it is designated SiOx .The value of x, which ranges between 1 and 2, is influenced by the deposition conditions.
The SiO source material is prepared by heating Si02 with Si, carbon, and hydrogen, or a hydrocarbon, to reduce the dioxide to the monoxide. Reduction takes place at roughly 1000°C, and SiO is formed in the vapor phase. This temperature is much too low to produce a significant vapor pressure of Si02, so the two oxides may be separated. The monoxide vapor is condensed out and subsequently powdered. This material, which is suitable for evaporation, is available commercially and need not be prepared by the IC manufacturer. | | Chemical Properties | brown or black chunks or powder | | Uses | To form thin surface films for protection of alu-
minum coatings, optical parts, mirrors, dielectrics,
or insulators.
| | Uses | Silicon monoxide (SiO) is a commonly used material for a wide variety of applications with the emphasis on IR multilayer coatings and adhesion promotion. SiO sublimes and should preferably be evaporated from resistance heated boats.
AREAS OF APPLICATION
Multilayer coatings especially for the IR, but also the VIS range
Adhesion promoter (VIS, NIR)
Electronics: dielectric, insulating and protective layers
Design: iridescent coatings, colored metallically reflecting coatings e.g. on sun glasses
Web coating: barrier layers on polymer films | | Uses | Silicon(II) oxide sputtering target coatings are used for optical applications in reflectors, flood lamps, mirrors, jewelry, and other products. The coatings can reduce reflection in the near infrared range or act as interference layers. It is used in thin-film capacitors, hybrid circuits, semiconductor components and other electronic applications. | | Definition | ChEBI: Silicon monoxide is a silicon oxide. |
| | Silicon monoxide Preparation Products And Raw materials |
|
